Airtac MBLCJ Adjustable Mini Cylinder MBLCJ50X225-100
The AirTAC Airtac MBLCJ Adjustable Mini Cylinder MBLCJ50X225-100 is a genuine double-acting aluminum-barrel mini cylinder with a Ø50mm bore, a 225mm nominal stroke and a rear adjustable-stroke stopper — trim up to 100mm for a usable window of 125–225mm. Adjustable air cushion (both ends).
- BoreØ50 mm
- Stroke225 mm
- Adjustable125–225 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM14×1.5
- CushionAdjustable air cushion (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ50X225-100
The AirTAC MBLCJ50X225-100 is a compact double-acting mini cylinder featuring a 50mm bore and a 16mm carbon-steel rod with 20um hard-chrome plating. It delivers 981N push and 881N pull force at 0.5 MPa. A rear travel stopper allows you to trim up to 100mm of the stroke, providing a usable end-position window of 125-225mm for precise machinery setup.
Unlike the fixed rubber bumper on an MBLJ, this model uses a screw-tunable adjustable air cushion at both ends to decelerate heavy 200kgf loads smoothly. The riveted aluminum barrel and grease-retaining piston seal ensure durable operation. Because this SKU lacks the -S magnet, it cannot accept a CMSG or DMSG position sensor.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ50X225-100 Technical Specifications
| Model | Airtac MBLCJ Adjustable Mini Cylinder MBLCJ50X225-100 |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (adjustable stroke) |
| Bore size | Ø50 mm |
| Nominal stroke | 225 mm |
| Adjustable window | 125–225 mm (trim 100 mm) |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion (both ends) |
| Max standard stroke | Up to 500 mm |
The rear stopper sets the end position — it is a travel stop, not a lock. Overall length = A + 2 × stroke + adjustable stroke. MBLJ/MBLCJ mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a margin.
Model Code: Airtac MBLCJ Adjustable Mini Cylinder MBLCJ50X225-100
| MBLCJ | MBLCJ aluminum-barrel adjustable-stroke mini cylinder with adjustable cushion. |
|---|---|
| 50 | Bore size in mm. |
| ×225 | Nominal stroke length in mm. |
| -100 | Adjustable-stroke amount (mm you can trim at the rear). |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
Related: MBLJ (adjustable stroke, fixed bumper), MBL (fixed stroke), MBLD (double rod).
Where the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ50X225-100 Is Used
Injection Mold Extraction
Provides the 981N pull force needed to extract heavy plastic parts from injection molds, using the 125-225mm stroke window to time the exact handoff to the robotic picker.
Wood Planer Feed
Adjusts the pressure roller on an industrial wood planer, relying on the tunable air cushion to prevent sudden jolts that would damage the grain finish on long timber boards.
Bottling Line Diverter
Handles the 1374N push force at 0.7 MPa to swing heavy stainless-steel diverter gates on a high-speed bottling line, cushioning the 225mm stroke to protect the gate hinges.
Is the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ50X225-100 the Right Cylinder?
Stepping down to the 40mm bore drops the output to 628N push at 0.5 MPa, while the larger 63mm bore raises it to 1558N. Choose this MBLCJ over an MBLJ when your moving mass requires tunable end-of-stroke deceleration to protect the end covers, or over an MBLC when you need the 125-225mm rear travel adjustment. Remember the rear stopper sets the travel end and the cushion only decelerates; neither holds the load, so use an external lock for position holding. Mounting is limited to Basic, FA, or LB (no SDB or back cover). To replace: match 50mm bore, 225mm stroke, 100mm adjust, G1/4 port, PT thread, and no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Adjustable window fits your end position
- ✓ Adjuster is a travel stop, not a lock
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear stopper for the end position (a travel stop, not a lock).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ50X225-100 FAQ
At 0.5 MPa it provides 981N push and 881N pull. At 0.7 MPa the push increases to 1374N. The maximum theoretical force is 200 kgf at 1.0 MPa.
The adjustable stroke is a rear mechanical stopper that sets the actual travel end within the 125-225mm window. The adjustable air cushion is a screw-tunable valve that decelerates the piston near the stroke ends. Neither holds the load; they only stop and slow the motion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Adjustable-Stroke Cylinders
Request a Quote for Airtac MBLCJ Adjustable Mini Cylinder MBLCJ50X225-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.