Airtac MBLCJ Adjustable Mini Cylinder MBLCJ50X50-30
The AirTAC Airtac MBLCJ Adjustable Mini Cylinder MBLCJ50X50-30 is a genuine double-acting aluminum-barrel mini cylinder with a Ø50mm bore, a 50mm nominal stroke and a rear adjustable-stroke stopper — trim up to 30mm for a usable window of 20–50mm. Adjustable air cushion (both ends).
- BoreØ50 mm
- Stroke50 mm
- Adjustable20–50 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM14×1.5
- CushionAdjustable air cushion (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ50X50-30
The AirTAC MBLCJ50X50-30 is a double-acting, single-rod mini cylinder featuring a riveted aluminum barrel and a robust Ø16 mm carbon-steel rod with 20 µm hard-chrome plating. It delivers 981 N of push force at 0.5 MPa and uses a G1/4 port. A rear stopper allows you to trim up to 30 mm of travel, creating a usable stroke window of 20-50 mm for precise end-position tuning.
Unlike the fixed rubber bumper found on the MBLJ series, this model incorporates a screw-tunable adjustable air cushion at both ends to manage deceleration for heavier loads. The overall length follows the A + 2 x stroke + adjust formula, meaning the 30 mm trim adds to the total footprint. Because this specific SKU lacks the -S magnet code, it cannot support CMSG, DMSG, or EMSG position sensors.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ50X50-30 Technical Specifications
| Model | Airtac MBLCJ Adjustable Mini Cylinder MBLCJ50X50-30 |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (adjustable stroke) |
| Bore size | Ø50 mm |
| Nominal stroke | 50 mm |
| Adjustable window | 20–50 mm (trim 30 mm) |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion (both ends) |
| Max standard stroke | Up to 500 mm |
The rear stopper sets the end position — it is a travel stop, not a lock. Overall length = A + 2 × stroke + adjustable stroke. MBLJ/MBLCJ mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a margin.
Model Code: Airtac MBLCJ Adjustable Mini Cylinder MBLCJ50X50-30
| MBLCJ | MBLCJ aluminum-barrel adjustable-stroke mini cylinder with adjustable cushion. |
|---|---|
| 50 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -30 | Adjustable-stroke amount (mm you can trim at the rear). |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
Related: MBLJ (adjustable stroke, fixed bumper), MBL (fixed stroke), MBLD (double rod).
Where the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ50X50-30 Is Used
Injection Mold Ejection
Provides 981 N of push at 0.5 MPa to break heavy plastic parts loose from molds, using the 20-50 mm adjustable window to dial in the exact ejection height.
Stator Winding Press
Uses the tunable air cushion to smoothly slow the 881 N pull force when seating copper windings, preventing wire deformation during the final 30 mm of travel.
PCB Router Clamping
Holds printed circuit boards firmly for routing operations, where the compact riveted body fits tight machine cavities and the stopper sets a precise 45 mm clamp depth.
Is the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ50X50-30 the Right Cylinder?
For tasks needing less force, stepping down to the Ø40 bore yields 628 N of push at 0.5 MPa, whereas moving up to the Ø63 bore provides 1558 N. Choose the MBLCJ over the MBLJ when your moving mass requires regulated end-of-stroke deceleration to protect the end covers, or pick the MBLC if you need fixed standard stroke lengths. The rear adjuster sets the travel end, and the cushion only decelerates; neither component locks the load, so external holding mechanisms are required for position retention. Mounting is restricted to Basic, FA, or LB styles, as there is no back-cover or SDB pivot option. A direct replacement requires a 50 mm bore, 50 mm stroke, 30 mm adjust code, G1/4 port, PT thread, and no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Adjustable window fits your end position
- ✓ Adjuster is a travel stop, not a lock
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear stopper for the end position (a travel stop, not a lock).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ50X50-30 FAQ
At 0.5 MPa, this 50 mm bore cylinder provides 981 N of push force and 881 N of pull force. At 0.7 MPa, the push force increases to 1374 N. The maximum theoretical force is 200 kgf at 1.0 MPa.
This specific SKU lacks the -S code, so it has no built-in magnet and cannot accept CMSG, DMSG, or EMSG sensors. The rear adjuster trims travel by up to 30 mm, giving a usable window of 20-50 mm. This mechanism acts only as a travel stop, while the separate adjustable air cushion handles end-of-stroke deceleration; neither holds the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Adjustable-Stroke Cylinders
Request a Quote for Airtac MBLCJ Adjustable Mini Cylinder MBLCJ50X50-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.