Airtac MBLD Dual Axis Type Mini Cylinder MBLD25X150
The AirTAC Airtac MBLD Dual Axis Type Mini Cylinder MBLD25X150 is a genuine double-acting double-rod aluminum-barrel mini cylinder with a Ø25mm bore and 150mm stroke. A rod exits both end covers, so extend and retract force are EQUAL — about 206 N each way at 0.5 MPa. Fixed rubber bumper.
- BoreØ25 mm
- Stroke150 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- CushionFixed rubber bumper
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLD Dual Axis Type Mini Cylinder MBLD25X150
The AirTAC MBLD25X150 is a double-acting, double-rod aluminum mini cylinder engineered for symmetrical motion tasks. Because a Ø10mm rod exits both end covers, the annulus area is identical on both sides, yielding exactly 206N of force at 0.5 MPa in both extend and retract directions. The 150mm stroke provides ample travel for mid-range positioning. It features a riveted rolling-packed barrel and a 20µm hard-chrome plated carbon-steel rod.
This configuration is ideal when you need to mount a workpiece on the front rod and a position flag or cam on the rear protruding rod. The fixed rubber bumper absorbs end-of-stroke impact, while the grease-retaining piston seal ensures consistent lubrication. Note that the overall length is A + 2 x 150mm, so you must leave physical clearance for the rear rod. This specific SKU lacks a built-in magnet and cannot support CMSG, DMSG, or EMSG position sensors.
Airtac MBLD Dual Axis Type Mini Cylinder MBLD25X150 Technical Specifications
| Model | Airtac MBLD Dual Axis Type Mini Cylinder MBLD25X150 |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (double rod) |
| Bore size | Ø25 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 300 mm |
Double-rod overall length = A + 2 × stroke — leave clearance for the rear rod. MBLD/MBLCD mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Output Force (Ø25mm, equal both ways)
| Pressure | Extend & retract force |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
A rod on both piston faces makes the annulus area equal, so extend and retract force (and speed) are the same. Actual usable force is lower due to friction.
Model Code: Airtac MBLD Dual Axis Type Mini Cylinder MBLD25X150
| MBLD | MBLD aluminum-barrel double-rod mini cylinder. |
|---|---|
| 25 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
| FA / LB | Mounting: FA flange or LB foot (no SDB on double-rod). |
Related: MBLCD (double rod, adjustable cushion), MBLC (single rod + cushion), MBL (single rod).
Where the Airtac MBLD Dual Axis Type Mini Cylinder MBLD25X150 Is Used
PCB Edge Conveyor Stop
Provides 206N of equal bidirectional force to actuate a 150mm travel stopper pin on a PCB assembly line, using the rear rod to drive a mirrored limit flag.
Textile Web Guide
Maintains balanced tension on a fabric tracking loom where the twin-rod design prevents uneven twisting during the 150mm extend and retract cycles.
Chip Sorter Diverter
Drives a dual-sided sorting flap for semiconductor wafer handling, leveraging the compact 25mm bore to fit within tight machine cell clearances.
Is the Airtac MBLD Dual Axis Type Mini Cylinder MBLD25X150 the Right Cylinder?
If your application requires less force, step down to the MBLD20X150, which provides 132N at 0.5 MPa. If you need more power, step up to the MBLD32X150, which offers 346N at 0.5 MPa. The 150mm stroke is well within the 300mm maximum standard stroke for this 25mm bore. Mounting options are limited to Basic, FA flange, or LB foot brackets; there is no SDB pivot or back-cover mounting option available for this double-rod series. To replace this cylinder, match the 25mm bore, 150mm stroke, G1/8 port, PT thread, and standard non-magnet configuration. A plain MBLD does not hold position without live air; the rod will drift if air pressure is removed, so use an external locking mechanism for static holding.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Rear-rod clearance (length = A + 2 × stroke)
- ✓ Mounting: Basic / FA / LB only
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Leave clearance for the rear rod (length = A + 2 × stroke).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLD Dual Axis Type Mini Cylinder MBLD25X150 FAQ
The MBLD25X150 provides equal force in both directions due to the double-rod design. The output is 206N at 0.5 MPa, 289N at 0.7 MPa, and a maximum theoretical 42 kgf at 1.0 MPa.
A double-rod cylinder has a rod protruding from both ends, providing equal extend and retract force while allowing you to mount a secondary cam or guide on the rear rod. This specific MBLD25X150 SKU does not have a built-in magnet, so it cannot be fitted with CMSG, DMSG, or EMSG position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Double-Rod Cylinders
Request a Quote for Airtac MBLD Dual Axis Type Mini Cylinder MBLD25X150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.