Airtac MBLD Dual Axis Type Mini Cylinder MBLD25X225
The AirTAC Airtac MBLD Dual Axis Type Mini Cylinder MBLD25X225 is a genuine double-acting double-rod aluminum-barrel mini cylinder with a Ø25mm bore and 225mm stroke. A rod exits both end covers, so extend and retract force are EQUAL — about 206 N each way at 0.5 MPa. Fixed rubber bumper.
- BoreØ25 mm
- Stroke225 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- CushionFixed rubber bumper
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLD Dual Axis Type Mini Cylinder MBLD25X225
The AirTAC MBLD25X225 is a double-acting, double-rod mini cylinder featuring a 25mm bore and 225mm stroke. Because a Ø10mm rod exits both ends of the riveted aluminum barrel, the annulus area is identical on each side. This yields exactly 206N of thrust and retraction force at 0.5 MPa, ensuring perfectly symmetrical motion for pushing and pulling. The 225mm travel is well-suited for traversing compact machine envelopes where a single-rod body would twist under unequal loads.
This configuration uses a fixed rubber bumper to soften end-of-stroke impacts and operates via G1/8 ports. A key mechanical benefit of the through-rod layout is the ability to mount a primary workpiece on the front thread (M10x1.25) while utilizing the rear protruding rod end for a cam, secondary tool, or position flag. Note that this specific SKU lacks a built-in magnet, meaning it cannot host CMSG, DMSG, or EMSG electronic position sensors. Overall length equals the base body dimension plus twice the stroke, requiring rear clearance for the extending rod.
Airtac MBLD Dual Axis Type Mini Cylinder MBLD25X225 Technical Specifications
| Model | Airtac MBLD Dual Axis Type Mini Cylinder MBLD25X225 |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (double rod) |
| Bore size | Ø25 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 300 mm |
Double-rod overall length = A + 2 × stroke — leave clearance for the rear rod. MBLD/MBLCD mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Output Force (Ø25mm, equal both ways)
| Pressure | Extend & retract force |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
A rod on both piston faces makes the annulus area equal, so extend and retract force (and speed) are the same. Actual usable force is lower due to friction.
Model Code: Airtac MBLD Dual Axis Type Mini Cylinder MBLD25X225
| MBLD | MBLD aluminum-barrel double-rod mini cylinder. |
|---|---|
| 25 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
| FA / LB | Mounting: FA flange or LB foot (no SDB on double-rod). |
Related: MBLCD (double rod, adjustable cushion), MBLC (single rod + cushion), MBL (single rod).
Where the Airtac MBLD Dual Axis Type Mini Cylinder MBLD25X225 Is Used
PCB Stencil Wiping
Drives a 225mm stroke wiper blade across a stencil printer with 206N of equal force, using the rear rod end to trigger a physical reset flag at full extension.
Semiconductor Cassette Transfer
Pushes wafer cassettes into a load lock port, leveraging the twin-rod anti-rotation property to keep the 225mm travel perfectly straight without external guides.
Textile Yedge Guiding
Shifts a fabric edge guide roller back and forth, relying on identical 206N push/pull thrust to maintain tension balance across the 225mm web path.
Is the Airtac MBLD Dual Axis Type Mini Cylinder MBLD25X225 the Right Cylinder?
If your mechanism requires less reach or a smaller footprint, the adjacent MBLD20X225 offers 132N both ways at 0.5 MPa. For heavier positioning, stepping up to the MBLD32X225 provides 346N both ways. The base MBLD uses a fixed rubber bumper; if your 225mm travel generates too much end-impact shock, consider the MBLCD variant for its adjustable air cushion. Mounting is restricted to Basic, FA flange, or LB foot brackets—SDB pivot or back-cover attachments are not available on this double-rod type. For replacements, verify the 25mm bore, 225mm stroke, G1/8 PT port, and lack of a magnet. Because the rod extends from both covers, plan rear clearance to avoid collision. The cylinder will drift and cannot hold position without constant live air pressure.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Rear-rod clearance (length = A + 2 × stroke)
- ✓ Mounting: Basic / FA / LB only
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Leave clearance for the rear rod (length = A + 2 × stroke).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLD Dual Axis Type Mini Cylinder MBLD25X225 FAQ
The MBLD25X225 provides equal force in both directions because the rod occupies both sides of the piston. It delivers 206N at 0.5 MPa, 289N at 0.7 MPa, and a maximum theoretical 42 kgf (412N) at 1.0 MPa.
A rod protrudes from both end covers, providing equal push/pull areas, identical speeds, and a rear rod end for mounting a cam or flag. This specific SKU lacks a built-in magnet, so it cannot accept CMSG, DMSG, or EMSG sensors; you would need an MBLD25X225S variant for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Double-Rod Cylinders
Request a Quote for Airtac MBLD Dual Axis Type Mini Cylinder MBLD25X225
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.