Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X200
The AirTAC Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X200 is a genuine double-acting double-rod aluminum-barrel mini cylinder with a Ø32mm bore and 200mm stroke. A rod exits both end covers, so extend and retract force are EQUAL — about 346 N each way at 0.5 MPa. Fixed rubber bumper.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- CushionFixed rubber bumper
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X200
The AirTAC MBLD32X200 is a double-acting, double-rod aluminum mini cylinder delivering 346 N of equal force in both extend and retract directions at 0.5 MPa. Because a Ø12 mm carbon-steel rod exits both end covers, the annulus area is identical on each side, ensuring perfectly balanced thrust and speed for a 200 mm stroke. This riveted rolling-packed body uses a fixed rubber bumper to soften end-of-travel impacts and operates at speeds between 30 and 800 mm/s.
This configuration uses a default PT tapered port (G1/8) and lacks a built-in magnet (-S), meaning it cannot accept CMSG or DMSG position sensors. The twin-rod architecture provides inherent anti-rotation resistance, allowing you to mount a workpiece on the front rod and a position flag or cam on the rear rod. Remember that overall length equals A plus 2 x stroke, so you must leave physical clearance at the back for the protruding rod.
Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X200 Technical Specifications
| Model | Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X200 |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (double rod) |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Double-rod overall length = A + 2 × stroke — leave clearance for the rear rod. MBLD/MBLCD mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Output Force (Ø32mm, equal both ways)
| Pressure | Extend & retract force |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod on both piston faces makes the annulus area equal, so extend and retract force (and speed) are the same. Actual usable force is lower due to friction.
Model Code: Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X200
| MBLD | MBLD aluminum-barrel double-rod mini cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
| FA / LB | Mounting: FA flange or LB foot (no SDB on double-rod). |
Related: MBLCD (double rod, adjustable cushion), MBLC (single rod + cushion), MBL (single rod).
Where the Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X200 Is Used
PCB Depaneling Saw
Drives a circular blade on the front rod while the rear rod protrudes to trigger a mechanical limit flag, utilizing the 346 N equal force for consistent cutting speed in both directions.
Textile Loom Tenter
Grips and releases fabric selvage using twin rods that resist rotational twist, ensuring the 200 mm travel maintains precise alignment across the material web.
Connector Pin Insertion
Presses electronic pins into housings with 484 N at 0.7 MPa, relying on the balanced double-rod piston to prevent binding during repetitive high-speed insertion.
Is the Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X200 the Right Cylinder?
For a 200 mm stroke requiring around 346 N both ways, this 32 mm bore is a solid mid-range choice. If your application is lighter, stepping down to the 25 mm bore drops the equal both-way force to 206 N at 0.5 MPa. If you need more push, stepping up to the 40 mm bore increases the symmetric thrust to 528 N. Mounting is limited to Basic, FA flange, or LB foot brackets—there is no back-cover or SDB pivot option for this double-rod type.
Because this SKU lacks the -S magnet, you cannot track rod position without adding external limit switches. The fixed rubber bumper absorbs impact but does not lock the load; without live air pressure, the rod will drift. At 200 mm, the stroke is well within the 500 mm maximum for this bore, but the 12 mm rod still requires external guidance to prevent side-load bending on long extensions. For high-mass cycling, consider the MBLCD variant which adds adjustable air cushions.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Rear-rod clearance (length = A + 2 × stroke)
- ✓ Mounting: Basic / FA / LB only
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Leave clearance for the rear rod (length = A + 2 × stroke).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X200 FAQ
Because the MBLD32X200 is a double-rod cylinder, the force is identical in both directions due to equal annulus areas. It outputs 346 N at 0.5 MPa, 484 N at 0.7 MPa, and a maximum theoretical 71 kgf at 1.0 MPa.
No, this specific SKU lacks the built-in magnet (-S code), so it cannot host AirTAC CMSG (reed) or DMSG/EMSG (electronic) switches. You would need the MBLD32X200S variant for internal position detection, or use the protruding rear rod to trigger an external flag sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Double-Rod Cylinders
Request a Quote for Airtac MBLD Dual Axis Type Mini Cylinder MBLD32X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.