Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X10
The AirTAC Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X10 is a genuine double-acting double-rod aluminum-barrel mini cylinder with a Ø63mm bore and 10mm stroke. A rod exits both end covers, so extend and retract force are EQUAL — about 1458 N each way at 0.5 MPa. Fixed rubber bumper.
- BoreØ63 mm
- Stroke10 mm
- Port sizeG1/4
- Acting typeDouble acting, double rod
- Rod threadM14×1.5
- CushionFixed rubber bumper
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X10
The AirTAC MBLD63X10 is a double-acting, double-rod aluminum mini cylinder engineered for heavy-duty short-throw tasks. A single piston drives an Ø16 mm carbon-steel rod out of both end covers, yielding identical extend and retract forces of 1457 N at 0.5 MPa and 2040 N at 0.7 MPa. The ultra-compact 10 mm stroke is ideal for high-force gripping, riveting, or short indexing movements where absolute symmetry is required. It features a fixed rubber bumper to soften end-of-travel impact and a grease-retaining piston seal.
Because a rod protrudes from the rear cover, you can mount a position flag or secondary cam on the opposite end to actuate external limit switches without interfering with the primary workpiece. The riveted rolling-packed aluminum barrel keeps the body light despite the 63 mm bore. This specific SKU lacks a built-in magnet (-S), so it cannot host CMSG, DMSG, or EMSG electronic position sensors. Operating pressure ranges from 0.15 to 1.0 MPa, and the thread form is default PT.
Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X10 Technical Specifications
| Model | Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X10 |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (double rod) |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Double-rod overall length = A + 2 × stroke — leave clearance for the rear rod. MBLD/MBLCD mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Output Force (Ø63mm, equal both ways)
| Pressure | Extend & retract force |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
A rod on both piston faces makes the annulus area equal, so extend and retract force (and speed) are the same. Actual usable force is lower due to friction.
Model Code: Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X10
| MBLD | MBLD aluminum-barrel double-rod mini cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
| FA / LB | Mounting: FA flange or LB foot (no SDB on double-rod). |
Related: MBLCD (double rod, adjustable cushion), MBLC (single rod + cushion), MBL (single rod).
Where the Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X10 Is Used
Pneumatic Riveting Press
Uses the 2040 N retract force at 0.7 MPa to upset rivets in sheet metal chassis assemblies, leveraging the 10 mm stroke for rapid, repeated high-impact cycles.
Dual-Side PCB Clamping
Mounts a soft jaw on the front rod and a mechanical limit flag on the rear rod to clamp circuit boards during conveyor indexing, ensuring zero rotational twist.
Stamping Pin Actuator
Drives a short marking pin into aluminum extrusions with equal 1457 N force in both directions, relying on the twin rods to prevent deflection during the strike.
Is the Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X10 the Right Cylinder?
For applications needing less force, the neighbouring MBLD50X10 provides 881 N at 0.5 MPa, offering a lighter 50 mm bore alternative. If even higher force is required, note that 63 mm is the largest bore in the MBL series, so stepping up requires switching to a different cylinder family. Choose this MBLD over the single-rod MBL when you need equal push/pull dynamics, anti-rotation guidance, or a rear rod for a cam. If adjustable air cushioning is required to absorb heavy end impacts, select the MBLCD variant instead, as the base MBLD only has a fixed rubber bumper.
This cylinder does not hold position without live air pressure—the rod will drift if supply drops. For secure load holding, integrate an external pneumatic lock or mechanical detent. Mounting is limited to Basic, FA flange, or LB foot brackets; there is no SDB pivot or back-cover option. To replace this unit, match the 63 mm bore, 10 mm stroke, G1/4 port, PT thread, and confirm no magnet is fitted.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Rear-rod clearance (length = A + 2 × stroke)
- ✓ Mounting: Basic / FA / LB only
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Leave clearance for the rear rod (length = A + 2 × stroke).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X10 FAQ
Because the double-rod design creates equal annulus areas on both sides, force is identical in both directions: 1457 N at 0.5 MPa, 2040 N at 0.7 MPa, and a maximum theoretical 297 kgf at 1.0 MPa.
No. This specific MBLD63X10 SKU lacks the built-in -S magnet, meaning it cannot interface with AirTAC CMSG reed or DMSG/EMSG electronic sensors. You must use the rear protruding rod to trip external mechanical switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Double-Rod Cylinders
Request a Quote for Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.