Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X150S
The AirTAC Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X150S is a genuine double-acting double-rod aluminum-barrel mini cylinder with a Ø63mm bore and 150mm stroke. A rod exits both end covers, so extend and retract force are EQUAL — about 1458 N each way at 0.5 MPa. Fixed rubber bumper.
- BoreØ63 mm
- Stroke150 mm
- Port sizeG1/4
- Acting typeDouble acting, double rod
- Rod threadM14×1.5
- CushionFixed rubber bumper
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X150S
The AirTAC MBLD63X150S is a double-acting, double-rod aluminum mini cylinder engineered for symmetrical motion. Because a Ø16mm carbon-steel rod exits both end covers, the annulus area is identical on extend and retract. This yields exactly 1457N of force both ways at 0.5MPa (2040N at 0.7MPa), eliminating the speed and force mismatch found in single-rod units. The 150mm stroke is ideal for deep presses or transferring heavier components, while the riveted rolling-packed barrel and grease-retaining piston seal ensure long service life.
This SKU includes a built-in magnet (-S) for position feedback via CMSG reed or DMSG/EMSG electronic sensors. The fixed rubber bumper absorbs end-of-stroke impact, though it does not lock the rod—live air is required to hold position. With a rod protruding from the rear, you can mount a secondary cam or position flag, but you must leave rear clearance since overall length equals A plus twice the stroke.
Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X150S Technical Specifications
| Model | Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X150S |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (double rod) |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Double-rod overall length = A + 2 × stroke — leave clearance for the rear rod. MBLD/MBLCD mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Output Force (Ø63mm, equal both ways)
| Pressure | Extend & retract force |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
A rod on both piston faces makes the annulus area equal, so extend and retract force (and speed) are the same. Actual usable force is lower due to friction.
Model Code: Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X150S
| MBLD | MBLD aluminum-barrel double-rod mini cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
| FA / LB | Mounting: FA flange or LB foot (no SDB on double-rod). |
Related: MBLCD (double rod, adjustable cushion), MBLC (single rod + cushion), MBL (single rod).
Where the Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X150S Is Used
Servo Press Peening
Provides 1457N of equal bidirectional force at 0.5MPa for peening small metal gears, using the rear rod to trigger a proximity sensor.
PCB Stencil Wiping
Drives a 150mm stroke wiper blade across solder paste stencils, utilizing the twin-rod's anti-rotation properties to maintain blade alignment.
Thermoforming Trim
Punches trimmed plastic edges on a continuous thermoforming line, where the symmetrical speed prevents web stretching during retraction.
Is the Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X150S the Right Cylinder?
When sizing this 63mm bore, step down to the 50mm bore if your load requires less than 881N at 0.5MPa, or step up if you need more than the 297kgf theoretical max at 1.0MPa offered here. Choose the MBLCD variant if your application demands adjustable air cushioning rather than the standard fixed rubber bumper. Mounting is restricted to Basic, FA flange, or LB foot brackets; there is no SDB pivot or back-cover option. For a direct replacement, match the 63mm bore, 150mm stroke, G1/4 port, default PT thread, and the -S magnet.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Rear-rod clearance (length = A + 2 × stroke)
- ✓ Mounting: Basic / FA / LB only
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Leave clearance for the rear rod (length = A + 2 × stroke).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X150S FAQ
Because the rod occupies both sides of the piston, force is equal in both directions: 1457N at 0.5MPa, 2040N at 0.7MPa, and a maximum theoretical 297kgf at 1.0MPa.
A rod exits both ends, creating equal annulus areas so extend and retract forces match perfectly. The rear rod can drive a second mechanism or mount a CMSG sensor flag, but requires rear clearance.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Double-Rod Cylinders
Request a Quote for Airtac MBLD Dual Axis Type Mini Cylinder MBLD63X150S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.