Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD25X100
The AirTAC Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD25X100 is a genuine double acting, double rod + cushion JIS-standard round-body mini air cylinder with a Ø25mm bore and 100mm stroke, 1/8" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ25 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting, double rod + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD25X100
Needle-set air cushions at both ends soak up high-speed end-of-stroke shock on this 25 mm bore, 100 mm stroke cylinder. As a JIS-standard round-body mini, the SUS304 stainless barrel with riveted aluminium covers is shorter than an ISO 6432 unit of the same size, saving valuable machine space while resisting mild washdown.
Because a rod exits both covers, the MFCD25X100 generates equal force both ways—206.1 N at 0.5 MPa and 288.5 N at 0.7 MPa via its 1/8" port. The twin rods resist torsional side-play, and you get a safe working load of about 124 N, or roughly 10.5 kg of vertical lift each way with a 2:1 margin. Note this SKU lacks a magnet, so it cannot take position sensors.
Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD25X100 Technical Specifications
| Model | Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD25X100 |
|---|---|
| Series | MFCD JIS mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD25X100
| MFCD | JIS-standard round-body mini cylinder (double-rod, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD25X100 Is Used
Twin-Tool Transfer
Uses the 206.1 N bidirectional thrust to push and pull a 10 kg workpiece between stations at high speed without rotational drift.
Balanced Vertical Lift
Raises and lowers a 10 kg jig smoothly over 100 mm, relying on the needle-set air cushion to prevent slamming at both ends.
High-Speed Gauging
Steadies a measuring head against a part using the dual rods for anti-rotation stability, absorbing end-stroke shock in compact spaces.
Is the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD25X100 the Right Cylinder?
Choose the MFCD25 over the MFCD20 (131.9 N at 0.5 MPa) when your payload needs that extra thrust, or step up to an MFCD32 (345.6 N) for heavier tooling. The variable air cushion shines on high-speed 100 mm strokes where decelerating a rotating load quietly matters. Remember the cushion only decelerates near stroke end; it is not a brake. For load holding on air loss, fit an external rod lock or pilot check valve.
Mounting options include LB foot, FA flange, and TC trunnion (no SDB or back-cover code exists since rods exit both ends). This non-magnet SKU cannot accept CMSG, DMSG, or EMSG switches; specify the -S variant if you need position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD25X100 FAQ
It delivers equal force both ways: 206.1 N at 0.5 MPa, 288.5 N at 0.7 MPa, and a theoretical max of 42 kgf at 1.0 MPa. The air port is 1/8".
No. This specific SKU lacks a magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You must specify the -S variant to enable sensing on the SUS304 stainless barrel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCD Cylinders
Request a Quote for Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD25X100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.