Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD25X75
The AirTAC Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD25X75 is a genuine double acting, double rod + cushion JIS-standard round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ25 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, double rod + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD25X75
Twin rods exiting both covers give this JIS-standard round-body mini cylinder equal thrust in both directions, generating 206.1 N at 0.5 MPa and 288.5 N at 0.7 MPa. The SUS304 stainless barrel shrinks mounting length compared to an ISO 6432 unit of the same 25 mm bore and 75 mm stroke, while resisting mild washdown corrosion.
Needle-set variable air cushions at each end absorb high-speed end-of-stroke shock for smooth 30-800 mm/s travel. The second rod steadies the load against rotation and provides a rear mounting point for stoppers or tooling. This non-magnet SKU cannot host position sensors; adding the -S option enables CMSG, DMSG or EMSG switches. Ports are 1/8" with M10x1.25 male rod threads.
Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD25X75 Technical Specifications
| Model | Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD25X75 |
|---|---|
| Series | MFCD JIS mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD25X75
| MFCD | JIS-standard round-body mini cylinder (double-rod, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD25X75 Is Used
Twin-Spindle Pick & Place
Drives two parallel grippers at 30-800 mm/s, using the equal 206.1 N bidirectional force to lift and place small parts without rotational drift.
High-Speed Divert Gate
Steadily flips a sorting flap back and forth across the 75 mm stroke, relying on the variable air cushions to soften impacts at rapid cycle rates.
Dual-Stopper Assembly
Extends a stopper blade from the front rod while the rear rod mounts a secondary limit stop, keeping side-play minimal during heavy pallet halts.
Is the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD25X75 the Right Cylinder?
Choose the MFCD25 over the MFCD20 (131.9 N at 0.5 MPa) when your load needs roughly 124 N of safe working force, or step up to the MFCD32 (345.6 N at 0.5 MPa) for heavier tooling. The twin-rod layout is ideal for high-speed anti-rotation tasks where a single rod would twist under offset loads.
Remember the needle cushions only decelerate the piston near stroke end and do not function as a brake. If the load must hold position during air loss or valve centering, install an external rod lock or pilot check valve. Mount via LB foot, FA flange or TC trunnion; there is no SDB bracket because a rod exits the rear cover.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD25X75 FAQ
It delivers equal force both ways because the double-rod design uses rod-side area on both strokes: 206.1 N at 0.5 MPa, 288.5 N at 0.7 MPa, and a theoretical max of 42 kgf at 1.0 MPa. The air port is 1/8".
No, this specific SKU lacks a magnet and cannot host CMSG, DMSG or EMSG switches; you must select the -S variant for sensing. The variable air cushions only decelerate the piston near stroke end and do not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCD Cylinders
Request a Quote for Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD25X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.