Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X100
The AirTAC Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X100 is a genuine double acting, double rod + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 100mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke100 mm
- Port size1/4"
- Acting typeDouble acting, double rod + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X100
Twin rods exiting both SUS304 stainless covers give the AirTAC MFCD32X100 equal thrust in both directions while actively resisting side-play. A needle-set variable air cushion at each end absorbs high-speed end-of-stroke shock, ensuring smooth deceleration across the 100mm travel. This JIS-standard round-body mini is also shorter than an ISO 6432 cylinder of the same bore and stroke, saving valuable machine space.
Delivering 345.6N at 0.5MPa and 483.8N at 0.7MPa through its 1/4in port, the 32mm bore handles robust loads. The twin-rod geometry yields a safe working load of roughly 207N, or about 17.6kg of vertical lift with a 2:1 margin. Note this specific SKU lacks a magnet, so it cannot accept CMSG/DMSG/EMSG sensors; specify the -S variant if position detection is required.
Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X100 Technical Specifications
| Model | Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X100 |
|---|---|
| Series | MFCD JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X100
| MFCD | JIS-standard round-body mini cylinder (double-rod, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X100 Is Used
Twin-Tool Stamping
Drives matched tools from both rods with 345.6N at 0.5MPa, ensuring parallel contact and absorbing shock with variable air cushions.
Anti-Rotation Diverter
Steadies a deflecting gate at high speed without side-play, using the 100mm stroke and twin-rod stability to handle 207N loads.
Vertical Lift Stopper
Lifts roughly 17.6kg vertically with a 2:1 safety margin, relying on equal both-ways force and smooth cushioned stops.
Is the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X100 the Right Cylinder?
When sizing between bores, compare this 32mm option (345.6N at 0.5MPa) against the MFCD25 (206.1N) for lighter duties or the MFCD40 (527.8N) for heavier payloads. The adjustable cushion and double-rod build excel in high-speed anti-rotation tasks or twin-tool setups where equal force both ways is critical. Mount via LB foot, FA flange, or TC trunnion (no SDB available since a rod exits both ends). Remember the air cushion only decelerates the piston near stroke end—it is not a lock; for load holding on air loss, install an external rod lock or pilot check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X100 FAQ
It delivers equal force in both directions: 345.6N at 0.5MPa, 483.8N at 0.7MPa, and a theoretical max of 70.5kgf at 1.0MPa. The air port is 1/4in.
No, this specific SKU lacks a magnet and cannot accept CMSG/DMSG/EMSG switches. You must order the -S variant for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCD Cylinders
Request a Quote for Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.