Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X350
The AirTAC Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X350 is a genuine double acting, double rod + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 350mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke350 mm
- Port size1/4"
- Acting typeDouble acting, double rod + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X350
Twin rods exit both covers of the AirTAC MFCD32X350, yielding equal 345.6 N thrust in each direction at 0.5 MPa while steadying the load against rotation. A needle-set variable air cushion at each end soaks up high-speed end-of-stroke shock, keeping motion quiet. The riveted SUS304 stainless round body with aluminium covers is JIS-standard, delivering a shorter mounting envelope than an ISO 6432 cylinder of the same bore and stroke.
This 32 mm bore, 350 mm stroke variant is non-standard and made-to-order, exceeding the 300 mm standard maximum. It uses a 1/4" port and M10x1.25 male rod threads. Without the -S magnet option, this SKU cannot take CMSG, DMSG or EMSG sensors. For vertical lifting, expect to handle about 17.6 kg each way with a 2:1 safety margin.
Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X350 Technical Specifications
| Model | Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X350 |
|---|---|
| Series | MFCD JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting, double rod + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X350
| MFCD | JIS-standard round-body mini cylinder (double-rod, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X350 Is Used
Long-Stroke Transfer
Pushes parts 350 mm down a line with 345.6 N both ways, twin rods preventing load twist during the extended high-speed transfer.
Twin-Tool Machining
Mounts a stopper on the rear rod and a clamp on the front, cycling smoothly as the needle air cushions absorb end-shock at each tool station.
Vertical Lift Gate
Raises a 17 kg barrier with a 2:1 margin, relying on equal rod-side force for stable descent while needing an external check valve to hold position.
Is the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X350 the Right Cylinder?
Choose between the 32 mm bore and its neighbours: the MFCD25 provides 206.1 N at 0.5 MPa, while the MFCD40 offers 527.8 N. The MFCD32X350 suits high-speed anti-rotation tasks needing roughly 345.6 N both ways, or a safe working load near 207 N. Because this 350 mm stroke exceeds the 300 mm standard, expect a made-to-order lead time.
Mount via LB foot, FA flange or TC trunnion (no SDB or back-cover code exists, as rods exit both ends). The air cushion only decelerates near stroke end; it is not a lock. If you must hold a load on air loss, add an external rod lock or pilot check valve. This non-magnet SKU cannot host position sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X350 FAQ
Force is equal both ways due to the double-rod design: 345.6 N at 0.5 MPa, 483.8 N at 0.7 MPa, and a theoretical max of 70.5 kgf at 1.0 MPa. The air port is 1/4".
This SKU lacks a magnet, so it cannot take CMSG, DMSG or EMSG switches; you need the -S variant for sensing. The variable air cushions only decelerate at stroke end, so for load holding on air loss you must fit an external rod lock or pilot check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCD Cylinders
Request a Quote for Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X350
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.