Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X500S
The AirTAC Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X500S is a genuine double acting, double rod + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 500mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke500 mm
- Port size1/4"
- Acting typeDouble acting, double rod + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X500S
Twin rods exiting both covers give this JIS-standard round-body mini cylinder equal force in both directions, outputting a true 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa. The SUS304 stainless barrel shrinks mounting length compared to an ISO 6432 unit, while the needle-set variable air cushion at each end absorbs high-speed end-of-stroke shock. A 500 mm stroke on this 32 mm bore exceeds the 300 mm standard limit, making this specific SKU a non-standard, made-to-order item.
The 12 mm rods feature M10x1.25 male threads and steady the load against rotation, while the back rod readily mounts sensors, stoppers or a second tool. Air connects via a 1/4" port. Because the -S suffix denotes a built-in piston magnet, this cylinder supports CMSG, DMSG and EMSG reed or electronic switches. For sizing, expect a safe working load around 207 N, which translates to lifting roughly 17.6 kg vertically with a 2:1 safety margin.
Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X500S Technical Specifications
| Model | Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X500S |
|---|---|
| Series | MFCD JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting, double rod + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X500S
| MFCD | JIS-standard round-body mini cylinder (double-rod, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X500S Is Used
Long-Stroke Transfer Pusher
Uses the full 500 mm travel to push 17 kg cartons between conveyor lanes, relying on the twin rods to prevent binding across the extended distance.
Twin-Tool Stamping Station
Mounts a secondary marking tool on the back rod to cycle simultaneously, using the 345.6 N force and needle cushions for quiet, impact-free operation.
Vertical Lift Gate
Raises and lowers a 20 kg access gate at high speed, absorbing end-stop shock via the adjustable air cushions while maintaining steady vertical guidance.
Is the Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X500S the Right Cylinder?
When choosing between bores, the MFCD25 provides 206.1 N at 0.5 MPa, this MFCD32 hits 345.6 N, and the MFCD40 jumps to 527.8 N. The double-rod architecture is ideal for high-speed anti-rotation tasks or twin-tool setups where symmetrical, shock-damped motion is critical. Mounting options include LB foot, FA flange or TC trunnion, but note there is no SDB mount or back-cover code since a rod exits both ends.
Remember that the variable air cushion only decelerates the piston near the stroke end; it does not function as a lock or brake. If your application must hold a vertical load during air loss or valve centering, the piston will drift, so you must add an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X500S FAQ
This double-acting, double-rod cylinder generates equal force in both directions: 345.6 N at 0.5 MPa, 483.8 N at 0.7 MPa, and a theoretical maximum of 70.5 kgf at 1.0 MPa. It uses a 1/4" air port and features a 12 mm rod with an M10x1.25 male thread on each end.
No, the variable air cushion only decelerates the piston near the end of its stroke to reduce shock; it is not a brake or lock. The piston will drift if air is lost or the valve is centered, so an external rod lock or pilot check valve is required for load holding. The -S magnet allows CMSG, DMSG and EMSG sensors to track position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCD Cylinders
Request a Quote for Airtac MFCD Double Rod Cushioned Mini Cylinder MFCD32X500S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.