Airtac MFCJ Adjustable Mini Cylinder MFCJ20X150-100S
The AirTAC Airtac MFCJ Adjustable Mini Cylinder MFCJ20X150-100S is a genuine double acting, adjustable stroke + cushion JIS-standard round-body mini air cylinder with a Ø20mm bore and 150mm stroke, 1/8" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ20 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCJ Adjustable Mini Cylinder MFCJ20X150-100S
Trim the extend stroke by up to 100 mm on site with this double-acting, variable-cushion mini cylinder. The riveted SUS304 stainless round body with aluminium covers is purpose-built for JIS-standard setups, delivering a shorter mounting length than an ISO 6432 unit of the same bore and stroke.
Driven by a 1/8" port and an Ø8 mm rod, the 20 mm bore yields 157 N of push force at 0.5 MPa. The integrated piston magnet (-S) supports CMSG, DMSG and EMSG switches, while the needle air cushion at both ends soaks up high-speed end-of-stroke shock.
Airtac MFCJ Adjustable Mini Cylinder MFCJ20X150-100S Technical Specifications
| Model | Airtac MFCJ Adjustable Mini Cylinder MFCJ20X150-100S |
|---|---|
| Series | MFCJ JIS mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFCJ Adjustable Mini Cylinder MFCJ20X150-100S
| MFCJ | JIS-standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCJ Adjustable Mini Cylinder MFCJ20X150-100S Is Used
Lightweight Component Pressing
Apply up to 157 N of push force at 0.5 MPa while tuning the exact extend position within the 100 mm window for delicate assembly fits.
High-Speed Diverting
Use the needle air cushions to decelerate the Ø8 mm rod smoothly at high cycle rates, preventing impact damage during product routing.
Adjustable Stop Positioning
Dial in the extend stroke on-site for changeovers, leveraging the SUS304 stainless body for washdown resistance in varied production environments.
Is the Airtac MFCJ Adjustable Mini Cylinder MFCJ20X150-100S the Right Cylinder?
Match the bore to your load: this 20 mm unit pushes 157 N at 0.5 MPa, whereas the larger MFCJ25 delivers 245.3 N. Choose the 20 mm bore for lighter, high-speed changeovers where the 100 mm adjust window and twin air cushions excel at dialling out end-of-stroke shock. Plan for an external rod lock or pilot check valve if the load must be held on air loss, as the cushion only decelerates and never locks the piston. Mount via LB foot, FA flange or TC trunnion (no SDB), and rely on the -S magnet for position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCJ Adjustable Mini Cylinder MFCJ20X150-100S FAQ
This 20 mm bore cylinder uses a 1/8" port and an Ø8 mm rod. It generates 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical max of 32 kgf at 1.0 MPa.
The external adjuster shortens the extend stroke by up to 100 mm (usable range 50-150 mm), while the variable air cushion at both ends decelerates the piston near stroke end. The -S suffix means it has a built-in magnet for CMSG, DMSG or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCJ Cylinders
Request a Quote for Airtac MFCJ Adjustable Mini Cylinder MFCJ20X150-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.