Airtac MFCJ Adjustable Mini Cylinder MFCJ25X160-10S
The AirTAC Airtac MFCJ Adjustable Mini Cylinder MFCJ25X160-10S is a genuine double acting, adjustable stroke + cushion JIS-standard round-body mini air cylinder with a Ø25mm bore and 160mm stroke, 1/8" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ25 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCJ Adjustable Mini Cylinder MFCJ25X160-10S
Dial in exact extend lengths on-site with the AirTAC MFCJ25X160-10S, a JIS-standard round-body mini cylinder featuring a 10mm external stroke adjuster and a needle-set variable air cushion at both ends. The SUS304 stainless barrel and riveted aluminium covers yield a shorter mounting envelope than an ISO 6432 unit of the same bore and stroke, resisting mild washdown corrosion while packing 245.3N of push force at 0.5MPa (206.1N pull). A 1/8" port and Ø10mm rod with an M10x1.25 male thread handle the pneumatic and mechanical loads.
Because this SKU includes the -S magnet, it is fully primed for CMSG, DMSG, or EMSG position sensing. The 160mm base stroke yields roughly 150-160mm of usable extend travel, and the integrated cushioning soaks up high-speed end-of-stroke shock for smooth, quiet changeovers. It delivers a safe working load of about 147N (60% of the 0.5MPa push figure), lifting approximately 12.5kg vertically with a 2:1 margin.
Airtac MFCJ Adjustable Mini Cylinder MFCJ25X160-10S Technical Specifications
| Model | Airtac MFCJ Adjustable Mini Cylinder MFCJ25X160-10S |
|---|---|
| Series | MFCJ JIS mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 160 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFCJ Adjustable Mini Cylinder MFCJ25X160-10S
| MFCJ | JIS-standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCJ Adjustable Mini Cylinder MFCJ25X160-10S Is Used
Tooling Trial Fits
Fine-tune the 150-160mm extend stroke by up to 10mm during machine changeovers, using the needle cushion to soften high-speed tool contact without re-engineering the mount.
Light Transfer Diverters
Pushes 12.5kg loads vertically with a 2:1 safety margin, while the variable air cushion absorbs the shock of rapid diverting cycles at up to 800mm/s.
Carton Flap Folding
Adjust the extend endpoint precisely to varying carton depths on the fly, relying on the 245.3N push force and SUS304 barrel for washdown-resistant packaging lines.
Is the Airtac MFCJ Adjustable Mini Cylinder MFCJ25X160-10S the Right Cylinder?
When sizing this adjustable-stroke family, compare the real thrust outputs: the MFCJ20 delivers 157N of push force at 0.5MPa, this MFCJ25 provides 245.3N, and the larger MFCJ32 jumps to 402.2N. Choose the 25mm bore when your trial-fit or changeover application needs that middle-ground force alongside a 10mm on-site stroke adjustment window to fine-tune the extend endpoint without swapping cylinders.
This model supports LB foot, FA flange, and TC trunnion mounts (no SDB or back-cover option on the adjustable build). The built-in -S magnet enables CMSG/DMSG/EMSG switches for end-position confirmation. Remember that the air cushion only decelerates the piston near stroke end—it is not a lock. If your load must hold position on air loss, fit an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCJ Adjustable Mini Cylinder MFCJ25X160-10S FAQ
This 25mm bore cylinder uses a 1/8" port and a Ø10mm rod with an M10x1.25 male thread. It generates 245.3N push and 206.1N pull at 0.5MPa, 343.4N push and 288.5N pull at 0.7MPa, with a theoretical maximum of 50kgf at 1.0MPa.
An external adjuster shortens the extend stroke by up to 10mm on-site (usable extend 150-160mm), while the needle-set variable air cushion at both ends decelerates the piston to absorb high-speed shock. The -S suffix means it has a built-in magnet for CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCJ Cylinders
Request a Quote for Airtac MFCJ Adjustable Mini Cylinder MFCJ25X160-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.