Airtac MFCJ Adjustable Mini Cylinder MFCJ25X200-75S
The AirTAC Airtac MFCJ Adjustable Mini Cylinder MFCJ25X200-75S is a genuine double acting, adjustable stroke + cushion JIS-standard round-body mini air cylinder with a Ø25mm bore and 200mm stroke, 1/8" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ25 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCJ Adjustable Mini Cylinder MFCJ25X200-75S
Tune both travel and end-of-stroke shock on site with this AirTAC adjustable-stroke, variable-cushion mini cylinder. The external adjuster lets you shorten the extend stroke by up to 75 mm (usable range 125-200 mm), while the needle air cushion at each end soaks up high-speed impact for smooth, quiet motion.
Built as a JIS-standard round-body unit with a SUS304 stainless barrel and riveted aluminium covers, it is shorter than an ISO 6432 cylinder for the same 25 mm bore and 200 mm stroke. The built-in magnet (-S) supports CMSG, DMSG and EMSG switches. Delivering 245.3 N push force at 0.5 MPa via a 1/8" port, it handles a safe working load of about 147 N and lifts roughly 12.5 kg vertically with a 2:1 margin.
Airtac MFCJ Adjustable Mini Cylinder MFCJ25X200-75S Technical Specifications
| Model | Airtac MFCJ Adjustable Mini Cylinder MFCJ25X200-75S |
|---|---|
| Series | MFCJ JIS mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFCJ Adjustable Mini Cylinder MFCJ25X200-75S
| MFCJ | JIS-standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCJ Adjustable Mini Cylinder MFCJ25X200-75S Is Used
Changeover Pusher
Dial in the 125-200 mm extend position during format changeovers on packaging lines, using the 75 mm window to set the exact push distance without swapping cylinders.
High-Speed Diverter
Divert lightweight cartons at speed while the variable air cushion absorbs end-of-stroke shock, protecting the 245.3 N thrust mechanism from harsh impacts.
Trial Fit Press
Test part seating depths safely by adjusting the extend stroke on the fly, relying on the cushion to decelerate the 12.5 kg vertical load before contact.
Is the Airtac MFCJ Adjustable Mini Cylinder MFCJ25X200-75S the Right Cylinder?
When sizing this adjustable family, compare the real thrust: this 25 mm bore gives 245.3 N push at 0.5 MPa, sitting neatly between the 20 mm bore at 157 N and the 32 mm bore at 402.2 N. Choose the 25 mm when you need that mid-range force alongside on-site stroke tuning for changeovers or trial fits.
The variable air cushion is strictly for decelerating the piston near stroke end, not for holding a load. If air pressure drops, the piston will drift; for suspended loads, install an external rod lock or pilot check valve. Mount via LB foot, FA flange or TC trunnion (no SDB), and use the -S magnet to fit CMSG, DMSG or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCJ Adjustable Mini Cylinder MFCJ25X200-75S FAQ
This 25 mm bore double-acting cylinder uses a 1/8" port and a 10 mm rod with an M10x1.25 thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum force of 50 kgf at 1.0 MPa.
The external adjuster shortens the extend stroke by up to 75 mm, giving a usable range of 125-200 mm. The variable air cushion at both ends decelerates the piston near the end of travel to reduce shock. The -S suffix means it has a built-in magnet for CMSG, DMSG or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCJ Cylinders
Request a Quote for Airtac MFCJ Adjustable Mini Cylinder MFCJ25X200-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.