Airtac MFCJ Adjustable Mini Cylinder MFCJ25X60-40SLB
The AirTAC Airtac MFCJ Adjustable Mini Cylinder MFCJ25X60-40SLB is a genuine double acting, adjustable stroke + cushion JIS-standard round-body mini air cylinder with a Ø25mm bore and 60mm stroke, 1/8" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ25 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCJ Adjustable Mini Cylinder MFCJ25X60-40SLB
Trim the extend stroke by up to 40 mm on site with the external adjuster, while the needle variable air cushion at both ends soaks up high-speed end-of-stroke shock. This double-acting JIS-standard round-body mini cylinder features a SUS304 stainless barrel and riveted aluminium covers, delivering 245.3 N push force at 0.5 MPa through a 1/8" port.
Because the MF body is shorter than an ISO 6432 cylinder for the same 25 mm bore and 60 mm stroke, it saves valuable mounting length. The built-in -S magnet supports CMSG, DMSG, or EMSG switches, and the included LB foot mount simplifies installation. With a safe working load of roughly 147 N, it lifts about 12.5 kg vertically with a 2:1 margin.
Airtac MFCJ Adjustable Mini Cylinder MFCJ25X60-40SLB Technical Specifications
| Model | Airtac MFCJ Adjustable Mini Cylinder MFCJ25X60-40SLB |
|---|---|
| Series | MFCJ JIS mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFCJ Adjustable Mini Cylinder MFCJ25X60-40SLB
| MFCJ | JIS-standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCJ Adjustable Mini Cylinder MFCJ25X60-40SLB Is Used
High-Speed Component Pressing
Dial in the exact 20-60 mm extend distance for pressing light fittings while the variable air cushion absorbs the 245.3 N end impact without slamming.
Adjustable Transfer Diverter
Fine-tune the actuator reach on the fly during product changeovers, relying on the LB foot mount and compact JIS body to fit tight conveyor frames.
Delicate Carton Forming
Set the extend stroke precisely to fold light cartons without crushing, using the needle cushion to decelerate the 12.5 kg vertical load smoothly.
Is the Airtac MFCJ Adjustable Mini Cylinder MFCJ25X60-40SLB the Right Cylinder?
When sizing this series, compare the real thrust: this 25 mm bore gives 245.3 N push at 0.5 MPa, sitting neatly between the MFCJ20 at 157 N and the MFCJ32 at 402.2 N. Choose the 25 mm bore when your changeover requires precise extend tuning within that 40 mm window alongside high-speed cushioning for shock-sensitive trial fits.
Remember that the air cushion only decelerates the piston near the end of stroke; it is not a lock or brake. If the load must be held on air loss, add an external rod lock or pilot-operated check valve. The -S magnet enables position sensing, and the LB foot bracket provides stable base mounting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCJ Adjustable Mini Cylinder MFCJ25X60-40SLB FAQ
This 25 mm bore cylinder has a 1/8" port and generates 245.3 N push / 206.1 N pull at 0.5 MPa, and 343.4 N push / 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
The external adjuster shortens the extend stroke by up to 40 mm on site, giving a usable extend range of 20-60 mm, while retract remains full. The -S suffix means it has a built-in piston magnet for CMSG, DMSG, or EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCJ Cylinders
Request a Quote for Airtac MFCJ Adjustable Mini Cylinder MFCJ25X60-40SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.