Airtac MFCJ Adjustable Mini Cylinder MFCJ32X100-75S
The AirTAC Airtac MFCJ Adjustable Mini Cylinder MFCJ32X100-75S is a genuine double acting, adjustable stroke + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 100mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke100 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X100-75S
Trim the extend stroke by up to 75 mm on site with the MFCJ32X100-75S, a JIS-standard round-body mini cylinder featuring a SUS304 stainless barrel and riveted aluminium covers. This double-acting actuator uses a needle-set variable air cushion at both ends to soak up high-speed end-of-stroke shock, while the built-in -S magnet supports CMSG, DMSG, or EMSG switches for position sensing.
Delivering 402.2 N of push force at 0.5 MPa through a 1/4" port and a 12 mm rod, it yields a safe working load of about 241 N, lifting roughly 20.5 kg vertically with a 2:1 margin. The riveted stainless build resists mild washdown corrosion, and for the same 32 mm bore and 100 mm stroke, this compact body is shorter than an ISO 6432 cylinder, saving valuable mounting length.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X100-75S Technical Specifications
| Model | Airtac MFCJ Adjustable Mini Cylinder MFCJ32X100-75S |
|---|---|
| Series | MFCJ JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFCJ Adjustable Mini Cylinder MFCJ32X100-75S
| MFCJ | JIS-standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X100-75S Is Used
High-Speed Component Pressing
Dial in the exact 25-100 mm extend reach and tune the needle air cushion to prevent impact damage when pressing lightweight fittings at high cycle rates.
Adjustable Transfer Diverter
Shift packages on a conveyor with a safe 241 N working load, fine-tuning the stroke length on-site to accommodate varying box sizes without swapping cylinders.
Vertical Lift Stops
Lift roughly 20.5 kg loads vertically and rely on the variable cushion to deliver smooth, quiet stops at the extend end, preventing sudden shocks to the payload.
Is the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X100-75S the Right Cylinder?
Weigh your thrust needs between the 32 mm and 40 mm bores: this MFCJ32 provides 402.2 N push at 0.5 MPa, whereas the MFCJ40 steps up to 628.3 N. Choose this adjustable-stroke, variable-cushion model for high-speed changeovers or shock-sensitive trial fits where you must tune both the extend end-position and the deceleration rate on the fly.
Mount via LB foot, FA flange, or TC trunnion (no SDB or back-cover option exists on this adjustable build). The -S magnet enables electronic or reed sensors, but note that the air cushion only decelerates the piston near stroke end—it is not a lock. If you need to hold a load on air loss, add an external rod lock or pilot check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X100-75S FAQ
This 32 mm bore cylinder features a 1/4" port and a 12 mm rod. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
The external adjuster shortens the extend stroke by up to 75 mm (usable range 25-100 mm), while the needle variable air cushion decelerates the piston at both ends. The -S suffix means it has a built-in magnet for CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCJ Cylinders
Request a Quote for Airtac MFCJ Adjustable Mini Cylinder MFCJ32X100-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.