Airtac MFCJ Adjustable Mini Cylinder MFCJ32X15-10
The AirTAC Airtac MFCJ Adjustable Mini Cylinder MFCJ32X15-10 is a genuine double acting, adjustable stroke + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 15mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke15 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X15-10
Dial in exact end positions on-site with the AirTAC MFCJ32X15-10, a JIS-standard round-body mini cylinder featuring a 10 mm adjustable extend window and variable air cushioning at both ends. The SUS304 stainless steel barrel and riveted aluminium covers form a compact body that is shorter than an ISO 6432 unit for the same 32 mm bore and 15 mm stroke, saving valuable mounting space while resisting mild washdown corrosion.
Driven by filtered air through a 1/4" port, this double-acting cylinder delivers a 402.2 N push force at 0.5 MPa. The needle cushions soak up end-of-stroke shock at high speeds, making it perfect for trial fits where both the 5 to 15 mm extend position and deceleration need tuning. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG sensors; add the -S variant if position feedback is required.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X15-10 Technical Specifications
| Model | Airtac MFCJ Adjustable Mini Cylinder MFCJ32X15-10 |
|---|---|
| Series | MFCJ JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFCJ Adjustable Mini Cylinder MFCJ32X15-10
| MFCJ | JIS-standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X15-10 Is Used
Short-Stroke Clamping
Clamps delicate electronics with a 402.2 N push force, using the 10 mm adjuster to trial-fit the exact 5 to 15 mm extend position without crushing components.
High-Speed Changeover
Tunes end-of-stroke shock on packaging lines running up to 800 mm/s, relying on the variable air cushion to bring the 12 mm rod to a smooth, quiet stop.
Lab Test Positioning
Acts as a compact actuator in washdown-prone lab testers, where the SUS304 barrel resists mild corrosion and the 1/4" port delivers rapid 345.6 N retract force.
Is the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X15-10 the Right Cylinder?
When sizing this 32 mm bore, compare it directly with the MFCJ25 at 245.3 N and the MFCJ40 at 628.3 N (both push @0.5 MPa). This model yields a safe working load of roughly 241 N, lifting about 20.5 kg vertically with a 2:1 margin, making it the middle-ground choice for moderate force. Choose the adjustable stroke and cushion combination when you need precise 5 to 15 mm extend tuning and smooth high-speed deceleration during changeovers.
Remember that the air cushion only decelerates the piston near the end of travel and the external adjuster merely sets that end position, neither acts as a lock. If your application must hold a load on air loss, install an external rod lock or pilot check valve. Mounting options include LB foot, FA flange and TC trunnion (no SDB), and you must select the -S magnet version to use reed or solid-state switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X15-10 FAQ
This 32 mm bore cylinder uses a 1/4" air port and a 12 mm rod with an M10x1.25 male thread. It generates a push force of 402.2 N and a pull force of 345.6 N at 0.5 MPa. At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG or EMSG sensors. You must select the -S variant of the MFCJ to enable magnetic sensing. The 10 mm external adjuster on this model shortens the extend stroke down to 5 mm, while the variable air cushion handles deceleration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCJ Cylinders
Request a Quote for Airtac MFCJ Adjustable Mini Cylinder MFCJ32X15-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.