Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-75S
The AirTAC Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-75S is a genuine double acting, adjustable stroke + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 175mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke175 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-75S
Dial in exact end positions on-site with the AirTAC MFCJ32X175-75S, a JIS-standard round-body mini cylinder featuring a 75 mm external stroke adjuster that shortens the nominal 175 mm extend stroke. A needle-set variable air cushion at both ends soaks up high-speed shock for quiet, smooth deceleration. The riveted SUS304 stainless barrel and aluminium covers resist mild corrosion and washdown, while the body is deliberately shorter than an ISO 6432 cylinder of the same bore and stroke to save mounting length.
Driven by a 32 mm bore and a 1/4" port, this double-acting actuator delivers 402.2 N of push force at 0.5 MPa, making it a robust mid-range choice. The built-in piston magnet (-S) supports CMSG, DMSG, and EMSG switches for position sensing. For sizing, expect a safe working load around 241 N, or enough power to lift about 20.5 kg vertically with a 2:1 safety margin.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-75S Technical Specifications
| Model | Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-75S |
|---|---|
| Series | MFCJ JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-75S
| MFCJ | JIS-standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-75S Is Used
Adjustable Tooling Stops
Fine-tune the extend stroke up to 75 mm during machine changeovers to hit exact tooling endpoints without machining new spacers, using the 402.2 N push force to drive mid-weight forming pins.
High-Speed Diverters
Absorb the impact of rapid package routing at up to 800 mm/s using the variable air cushions, safely handling loads near the 241 N safe working limit on washdown-resistant SUS304 stainless.
Vertical Lift Stops
Lift items up to 20.5 kg with a 2:1 margin, adjusting the extend position on-site to accommodate varying pallet heights while relying on external check valves for fall protection.
Is the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-75S the Right Cylinder?
Choose the MFCJ32 when your changeover requires roughly 402 N of push force at 0.5 MPa; step up to the MFCJ40 (628.3 N) if moving heavier tooling, or drop to the MFCJ25 (245.3 N) for lighter pick-and-place. The 75 mm adjustable window here is ideal for trial fits where both the exact extend endpoint and end-of-stroke shock need tuning on the fly. Mount via LB foot, FA flange, or TC trunnion (no SDB or back-cover option exists on this build).
Remember that the air cushion and external adjuster only decelerate the piston and set the end position—they do not hold the load. If air pressure drops, the piston will drift; for vertical or suspended loads, install an external rod lock or pilot-operated check valve. Position feedback requires the -S magnet already specified here to pair with CMSG, DMSG, or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-75S FAQ
This 32 mm bore cylinder uses a 1/4" port and features a variable air cushion at both ends. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa. Operating speed ranges from 30-800 mm/s.
The external adjuster shortens the 175 mm extend stroke by up to 75 mm on-site, allowing precise endpoint tuning for trial fits. The variable air cushion only decelerates the piston near the stroke end; it is not a brake. The -S magnet enables CMSG/DMSG/EMSG sensors, but an external rod lock is required to hold loads on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCJ Cylinders
Request a Quote for Airtac MFCJ Adjustable Mini Cylinder MFCJ32X175-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.