Airtac MFCJ Adjustable Mini Cylinder MFCJ32X20-20
The AirTAC Airtac MFCJ Adjustable Mini Cylinder MFCJ32X20-20 is a genuine double acting, adjustable stroke + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 20mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke20 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X20-20
Dial in exact end positions and absorb end-of-stroke shock with the AirTAC MFCJ32X20-20. This JIS-standard round-body mini cylinder features a SUS304 stainless barrel and riveted aluminium covers, giving you a shorter mounting envelope than an ISO 6432 unit of the same size. An external adjuster lets you shorten the extend stroke by up to 20 mm on site, while needle valves provide a variable air cushion at both ends for smooth 30-800 mm/s operation.
Driven by a 32 mm bore and a 1/4" port, it delivers 402.2 N push and 345.6 N pull at 0.5 MPa. That translates to a safe working load of roughly 241 N, or enough to lift about 20.5 kg vertically with a 2:1 margin. Note this SKU lacks the -S magnet, so it cannot accept CMSG, DMSG or EMSG sensors.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X20-20 Technical Specifications
| Model | Airtac MFCJ Adjustable Mini Cylinder MFCJ32X20-20 |
|---|---|
| Series | MFCJ JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 20 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFCJ Adjustable Mini Cylinder MFCJ32X20-20
| MFCJ | JIS-standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X20-20 Is Used
Adjustable Tooling Stops
Fine-tune the extend end by up to 20 mm during machine changeovers, letting the 402.2 N push force seat parts accurately without adding physical shims.
High-Speed Diverting
Use the variable air cushion to silently absorb shock at 800 mm/s as the 32 mm bore pushes light cartons off a belt, preventing end-cap slam.
Trial-Fit Prototyping
Dial in the exact extend position on a test rig, safely moving loads up to 241 N while the SUS304 barrel shrugs off mild washdown splashes.
Is the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X20-20 the Right Cylinder?
Choose the MFCJ32 (402.2 N push at 0.5 MPa) for moderate clamping and lifting, stepping up to the MFCJ40 (628.3 N) if your payload exceeds 241 N. Conversely, lighter duties under 245.3 N are better served by the MFCJ25. The 20 mm adjustable window here is perfect for trial fits where you need to tune the extend end without machining spacers, and the dual air cushions handle high-speed changeovers gracefully.
Remember that the cushion only decelerates the piston near the end of travel—it is not a brake. If the load must hold position on air loss, fit an external rod lock or pilot check valve. For mounting, use LB foot, FA flange or TC trunnion brackets (there is no SDB or back-cover option on this build), and order the -S variant if you need position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X20-20 FAQ
This 32 mm bore cylinder uses a 1/4" port. At 0.5 MPa it pushes 402.2 N and pulls 345.6 N. At 0.7 MPa it pushes 563 N and pulls 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa.
This specific SKU lacks a magnet, so it cannot accept CMSG, DMSG or EMSG switches; you need the -S variant for sensing. The external adjuster shortens the extend stroke by up to 20 mm on site, while the variable air cushion at both ends decelerates the piston near stroke end to reduce shock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCJ Cylinders
Request a Quote for Airtac MFCJ Adjustable Mini Cylinder MFCJ32X20-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.