Airtac MFCJ Adjustable Mini Cylinder MFCJ32X200-10
The AirTAC Airtac MFCJ Adjustable Mini Cylinder MFCJ32X200-10 is a genuine double acting, adjustable stroke + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 200mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X200-10
Trim the extend stroke by up to 10 mm on site with this adjustable-stroke, variable-cushion mini cylinder. The 32 mm bore delivers 402.2 N of push force at 0.5 MPa, and the needle air cushion at both ends soaks up high-speed shock for smooth stops.
Built as a JIS-standard round-body unit with a SUS304 stainless barrel and riveted aluminium covers, it is shorter than an ISO 6432 cylinder for the same stroke, saving mounting length. This SKU lacks a magnet, so it cannot take a sensor; add the -S option for CMSG or DMSG switches. The 1/4" port and M10x1.25 male rod thread match the standard 32 mm bore. With a 0.5 MPa push force, the safe working load is about 241 N, lifting roughly 20.5 kg vertically with a 2:1 margin.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X200-10 Technical Specifications
| Model | Airtac MFCJ Adjustable Mini Cylinder MFCJ32X200-10 |
|---|---|
| Series | MFCJ JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFCJ Adjustable Mini Cylinder MFCJ32X200-10
| MFCJ | JIS-standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X200-10 Is Used
Changeover Trial Fits
Dial in the exact 190-200 mm extend position on packaging changeovers while the air cushion absorbs high-speed end shocks.
Light Press Operations
Apply up to 241 N of safe working force for seating small components, tweaking the 10 mm stroke window to prevent overtravel.
Diverter Positioning
Sort items on a line with a 32 mm bore cylinder, using the adjustable extend and dual cushions for quiet, smooth stops.
Is the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X200-10 the Right Cylinder?
When sizing, compare both bores: the 32 mm bore gives 402.2 N push at 0.5 MPa, while the larger MFCJ40 provides 628.3 N. Choose this 32 mm model for medium loads where you need to fine-tune the extend position within a 190-200 mm window during high-speed changeovers.
The variable air cushion only decelerates the piston near the end of stroke; it is not a lock or brake, and the cylinder will drift on air loss. For a held load, install an external rod lock or pilot check valve. Mount via LB foot, FA flange, or TC trunnion (no SDB). Because this SKU has no -S magnet, it cannot accept position sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X200-10 FAQ
This 32 mm bore cylinder features a 1/4" port. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical max of 82 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot accept CMSG or DMSG switches. You must select the -S variant to enable sensing. The 10 mm adjuster shortens the extend stroke, and the variable air cushion decelerates the piston but does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCJ Cylinders
Request a Quote for Airtac MFCJ Adjustable Mini Cylinder MFCJ32X200-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.