Airtac MFCJ Adjustable Mini Cylinder MFCJ32X200-100
The AirTAC Airtac MFCJ Adjustable Mini Cylinder MFCJ32X200-100 is a genuine double acting, adjustable stroke + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 200mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X200-100
Dial in exact end positions on-site with the AirTAC MFCJ32X200-100, a JIS-standard round-body mini cylinder featuring a 100 mm adjustable extend window. The external needle shortens the forward stroke from its 200 mm nominal length, while the variable air cushion at both ends absorbs high-speed shock for smooth deceleration. A SUS304 stainless barrel and riveted aluminium covers keep the build compact and lighter than a tie-rod unit.
This 32 mm bore double-acting actuator pushes with 402.2 N at 0.5 MPa, yielding a safe working load of roughly 241 N or a 20.5 kg vertical lift with a 2:1 margin. It uses a 1/4" port and a 12 mm rod. Note that this SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG sensors. The cushion only decelerates the piston near stroke end and does not lock the load.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X200-100 Technical Specifications
| Model | Airtac MFCJ Adjustable Mini Cylinder MFCJ32X200-100 |
|---|---|
| Series | MFCJ JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFCJ Adjustable Mini Cylinder MFCJ32X200-100
| MFCJ | JIS-standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X200-100 Is Used
Adjustable Tooling Stops
Fine-tune the 200 mm extend stroke down by up to 100 mm to set precise feeding depths on machining lines, using the 402.2 N push force to drive light tooling heads.
High-Speed Diverters
Leverage the variable air cushion to decelerate rapid package-routing strokes smoothly, preventing end-cap shock while hitting varying lane positions on the fly.
Vertical Lift Stops
Lift roughly 20.5 kg of goods vertically, adjusting the extend endpoint during commissioning to accommodate different pallet heights without swapping cylinders.
Is the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X200-100 the Right Cylinder?
When sizing this series, compare the real thrust: the 32 mm bore provides 402.2 N push at 0.5 MPa, whereas stepping up to the MFCJ40 delivers 628.3 N. Choose the 32 mm bore for lighter, faster changeovers where the 100 mm adjustment window lets you tune trial fits without machining. Mount via LB foot, FA flange, or TC trunnion (SDB is unavailable).
Because this is a non-magnet SKU, position sensing is impossible without switching to an -S variant. Remember that the air cushion and stroke adjuster manage end-of-travel shock and position, but they do not hold the load on air loss. For vertical or suspended loads that must resist drift, add an external rod lock or pilot check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X200-100 FAQ
This 32 mm bore cylinder uses a 1/4" port and a 12 mm rod with an M10x1.25 male thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
This specific SKU lacks a magnet, so it cannot accept CMSG, DMSG, or EMSG switches; you need an -S variant for sensing. The external adjuster shortens the extend stroke by up to 100 mm on-site, and the variable air cushion at both ends decelerates the piston near the stroke ends but does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCJ Cylinders
Request a Quote for Airtac MFCJ Adjustable Mini Cylinder MFCJ32X200-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.