Airtac MFCJ Adjustable Mini Cylinder MFCJ32X60-10
The AirTAC Airtac MFCJ Adjustable Mini Cylinder MFCJ32X60-10 is a genuine double acting, adjustable stroke + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 60mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke60 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X60-10
Dial in the exact extend position on-site with the AirTAC MFCJ32X60-10, a JIS-standard round-body mini cylinder featuring a 10 mm adjustable stroke window and a needle-set variable air cushion at both ends. The SUS304 stainless steel barrel and riveted aluminium covers yield a shorter mounting envelope than an ISO 6432 unit, resisting mild washdown while saving space.
Driven by filtered air through a 1/4" port, this double-acting 32 mm bore generates 402.2 N of push force at 0.5 MPa. That translates to a safe working load of roughly 241 N, or enough to lift about 20.5 kg vertically with a 2:1 margin. Note this SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG position switches.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X60-10 Technical Specifications
| Model | Airtac MFCJ Adjustable Mini Cylinder MFCJ32X60-10 |
|---|---|
| Series | MFCJ JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFCJ Adjustable Mini Cylinder MFCJ32X60-10
| MFCJ | JIS-standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X60-10 Is Used
High-Speed Part Ejection
Trim the extend stroke by up to 10 mm to perfect the ejection arc of light machined components, while the variable air cushion absorbs the shock of rapid 402.2 N pushes.
Sorting Diverter Tuning
Fine-tune the diverter angle on-site for mixed product sizes. The needle cushion ensures smooth, quiet stops during fast 30-800 mm/s changeovers.
Light Carton Sealing
Adjust the pressing depth precisely for various flap thicknesses. The 32 mm bore provides a safe 241 N working load without crushing lightweight packaging.
Is the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X60-10 the Right Cylinder?
When sizing between the two available bores, the MFCJ32 hits 402.2 N push at 0.5 MPa, whereas stepping up to the MFCJ40 yields 628.3 N. Choose this 32 mm bore for lighter, high-speed changeovers where you need to trim the extend stroke by up to 10 mm and tune the end-of-travel shock. For heavier fixtures, the 40 mm bore is the better option.
Mounting options include LB foot, FA flange, and TC trunnion (there is no SDB or back-cover option on this adjustable build). Because the air cushion only decelerates the piston near the stroke end, it will not hold a load if air pressure drops; add an external rod lock or pilot check valve if you need drift prevention.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X60-10 FAQ
This 32 mm bore double-acting cylinder uses a 1/4" port and a 12 mm rod with an M10x1.25 male thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum force of 82 kgf at 1.0 MPa.
The external adjuster shortens the extend stroke by up to 10 mm on-site, giving a usable extend range of 50-60 mm; retract remains full. This specific SKU does not have the -S magnet, so it cannot accept CMSG, DMSG, or EMSG magnetic switches. The variable air cushion only decelerates the piston near the ends and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCJ Cylinders
Request a Quote for Airtac MFCJ Adjustable Mini Cylinder MFCJ32X60-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.