Airtac MFCJ Adjustable Mini Cylinder MFCJ32X60-40
The AirTAC Airtac MFCJ Adjustable Mini Cylinder MFCJ32X60-40 is a genuine double acting, adjustable stroke + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 60mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke60 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X60-40
Trim the extend stroke by up to 40 mm on site with this adjustable-stroke mini cylinder, which also features a needle-set variable air cushion at both ends to absorb high-speed shock. The MFCJ32X60-40 is a JIS-standard round-body actuator built with a SUS304 stainless barrel and riveted aluminium covers, offering a shorter mounting length than an ISO 6432 unit for the same bore.
Operating on a 1/4" port with a 12 mm rod, this double-acting 32 mm bore generates 402.2 N of push force at 0.5 MPa, yielding a safe working load of roughly 241 N. It lifts about 20.5 kg vertically with a 2:1 margin. Note this SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG switches.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X60-40 Technical Specifications
| Model | Airtac MFCJ Adjustable Mini Cylinder MFCJ32X60-40 |
|---|---|
| Series | MFCJ JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFCJ Adjustable Mini Cylinder MFCJ32X60-40
| MFCJ | JIS-standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X60-40 Is Used
High-Speed Component Pressing
Dial in the exact 20 to 60 mm extend distance for pressing light fittings while the variable air cushion prevents harsh end impacts at high speed.
Adjustable Transfer Diverter
Fine-tune the pusher stroke by up to 40 mm during product changeovers, using the 402.2 N thrust to redirect light packages smoothly.
Carton Flap Folding
Tune the extend end and needle the cushion to fold varying carton sizes quietly without slamming, leveraging the 241 N safe working load.
Is the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X60-40 the Right Cylinder?
When sizing the 32 mm bore against the MFCJ40, the 32 delivers 402.2 N of push force at 0.5 MPa versus 628.3 N for the 40, making the 32 ideal for lighter, high-speed changeovers where both the end position and end-of-stroke shock need on-site tuning. Choose this adjustable-stroke and cushioned build for trial fits where a fixed stroke or bumper would fail.
Mounting options include LB foot, FA flange, and TC trunnion, with no SDB or back-cover available. Remember that the air cushion only decelerates the piston near stroke end and does not lock the load; if you need to hold position on air loss, add an external rod lock or pilot check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X60-40 FAQ
This 32 mm bore cylinder uses a 1/4" port and a 12 mm rod. It generates a push of 402.2 N and a pull of 345.6 N at 0.5 MPa, and a push of 563 N and a pull of 483.8 N at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, so it cannot accept CMSG, DMSG, or EMSG magnetic switches. You must select the -S variant to enable sensing, and you can still use the external adjuster to shorten the extend stroke by up to 40 mm.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCJ Cylinders
Request a Quote for Airtac MFCJ Adjustable Mini Cylinder MFCJ32X60-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.