Airtac MFCJ Adjustable Mini Cylinder MFCJ32X75-10
The AirTAC Airtac MFCJ Adjustable Mini Cylinder MFCJ32X75-10 is a genuine double acting, adjustable stroke + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 75mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke75 mm
- Port size1/4"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X75-10
Tune both the extend end-point and end-of-stroke shock on-site with this 32 mm bore double-acting mini cylinder. The external adjuster shortens the extend stroke by up to 10 mm (usable 65-75 mm), while the needle variable air cushion at both ends soaks up high-speed kinetic energy for smooth deceleration. It features a 1/4" port, a 12 mm rod with an M10x1.25 male thread, and operates at 30-800 mm/s.
Built as a JIS-standard round-body unit with a SUS304 stainless barrel and riveted aluminium covers, this body is deliberately shorter than an ISO 6432 cylinder for the same bore and stroke, saving valuable mounting length while resisting mild washdown corrosion. Delivering 402.2 N push force at 0.5 MPa, it yields a safe working load of roughly 241 N and lifts about 20.5 kg vertically with a 2:1 margin. Note this SKU lacks the -S magnet, so it cannot accept CMSG, DMSG or EMSG sensors.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X75-10 Technical Specifications
| Model | Airtac MFCJ Adjustable Mini Cylinder MFCJ32X75-10 |
|---|---|
| Series | MFCJ JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFCJ Adjustable Mini Cylinder MFCJ32X75-10
| MFCJ | JIS-standard round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X75-10 Is Used
High-Speed Component Pressing
Dial in the exact 65-75 mm extend reach and use the needle air cushion to absorb impact when pressing light fittings at high cycle rates.
Adjustable Transfer Diverter
Fine-tune the stroke end-point on the fly during product changeovers, letting the variable cushion handle the shock of fast diverting motions.
Packaging Flap Folding
Set the precise extend length for various carton sizes while the dual air cushions ensure quiet, smooth stops during rapid packaging runs.
Is the Airtac MFCJ Adjustable Mini Cylinder MFCJ32X75-10 the Right Cylinder?
When sizing this adjustable family, compare both bores with real 0.5 MPa figures: the MFCJ32 (this unit) pushes 402.2 N, whereas the larger MFCJ40 pushes 628.3 N. Choose the 32 mm bore for compact trial fits and changeovers where exact extend positioning and high-speed shock absorption both need field tuning. Remember the air cushion only decelerates the piston near the stroke end—it is not a lock. If the application must hold a load on air loss, add an external rod lock or pilot-operated check valve, as the piston will drift.
Mounting options include LB foot, FA flange, and TC trunnion (there is no SDB or back-cover option on this build). Because this specific SKU is non-magnetic, it cannot take position sensors; if you need CMSG, DMSG or EMSG switches, select the -S variant instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFCJ Adjustable Mini Cylinder MFCJ32X75-10 FAQ
This 32 mm bore cylinder has a 1/4" port and a 12 mm rod. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
The external adjuster shortens the extend stroke by up to 10 mm on-site without affecting the full retract. This specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG or EMSG sensors; you must choose the -S variant for sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MFCJ Cylinders
Request a Quote for Airtac MFCJ Adjustable Mini Cylinder MFCJ32X75-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.