Airtac MFD Double Rod Miniature Cylinder MFD25X10
The AirTAC Airtac MFD Double Rod Miniature Cylinder MFD25X10 is a genuine double acting, double rod JIS-standard round-body mini air cylinder with a Ø25mm bore and 10mm stroke, 1/8" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ25 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFD Double Rod Miniature Cylinder MFD25X10
Twin rods exiting both covers define the AirTAC MFD25X10, yielding identical push and pull forces of 206.1 N at 0.5 MPa. This JIS-standard round-body mini cylinder uses a SUS304 stainless barrel with riveted aluminium covers, offering a shorter mounting envelope than an ISO 6432 unit of the same size.
The second piston rod steadies the payload and resists rotational side-play, while providing a ready mount for a stopper or secondary tool. With a 1/8" port and M10x1.25 male rod threads, this non-magnet SKU cannot host sensors; add an -S variant for CMSG/DMSG/EMSG switches. Expect a safe working load around 124 N, or a 10.5 kg vertical lift with a 2:1 margin.
Airtac MFD Double Rod Miniature Cylinder MFD25X10 Technical Specifications
| Model | Airtac MFD Double Rod Miniature Cylinder MFD25X10 |
|---|---|
| Series | MFD JIS mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MFD Double Rod Miniature Cylinder MFD25X10
| MFD | JIS-standard round-body mini cylinder (double-rod). |
|---|---|
| 25 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFD Double Rod Miniature Cylinder MFD25X10 Is Used
Anti-Rotation Slides
The dual M10 rods resist twist during short 10 mm transfers, keeping loads perfectly aligned without side-play.
Twin-Tool Actuation
Mount a secondary tool or stopper on the rear rod to utilize the equal 206.1 N force output in both directions.
Symmetrical Clamping
Ideal for clamping tasks requiring identical push and pull forces, utilizing the steady 124 N safe working load.
Is the Airtac MFD Double Rod Miniature Cylinder MFD25X10 the Right Cylinder?
When sizing this 25 mm bore, compare it against the MFD20 at 131.9 N or the MFD32 at 345.6 N at 0.5 MPa. The double-rod layout is ideal when you need anti-rotation stability or twin-tool actuation, giving equal 206.1 N force in both directions.
This specific SKU lacks a magnet and cannot support position sensing. For load holding, note that the fixed TPU bumper pads only decelerate at stroke end and will not brake the piston on air loss—install an external rod lock or pilot check valve. Mount via LB foot, FA flange, or TC trunnion, as no SDB or back-cover option exists.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFD Double Rod Miniature Cylinder MFD25X10 FAQ
Force is equal both ways due to the double-rod design: 206.1 N at 0.5 MPa, 288.5 N at 0.7 MPa, and a theoretical max of 42 kgf at 1.0 MPa. The air port is 1/8".
No, this base SKU lacks a magnet and cannot take a switch. You must select the -S variant to use CMSG, DMSG, or EMSG magnetic sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MFD Double Rod Miniature Cylinder MFD25X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.