Airtac MFD Double Rod Miniature Cylinder MFD32X15
The AirTAC Airtac MFD Double Rod Miniature Cylinder MFD32X15 is a genuine double acting, double rod JIS-standard round-body mini air cylinder with a Ø32mm bore and 15mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke15 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFD Double Rod Miniature Cylinder MFD32X15
Twin rods exiting both covers give the AirTAC MFD32X15 equal pushing and pulling force, generating 345.6 N at 0.5 MPa in either direction. This JIS-standard round-body mini cylinder uses a SUS304 stainless barrel with riveted aluminium covers, resisting mild corrosion while saving mounting length compared to an ISO 6432 unit of the same bore and stroke.
With a short 15 mm stroke, the non-magnetic SKU cannot host CMSG, DMSG or EMSG sensors; add the -S variant for position detection. The 1/4" port feeds the chamber, and fixed TPU bumper pads absorb end-of-stroke impacts. For a safe working load, expect about 207 N, which translates to lifting roughly 17.6 kg vertically with a 2:1 margin.
Airtac MFD Double Rod Miniature Cylinder MFD32X15 Technical Specifications
| Model | Airtac MFD Double Rod Miniature Cylinder MFD32X15 |
|---|---|
| Series | MFD JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MFD Double Rod Miniature Cylinder MFD32X15
| MFD | JIS-standard round-body mini cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFD Double Rod Miniature Cylinder MFD32X15 Is Used
Anti-Rotation Slides
Twin rods prevent twist during the brief 15 mm travel, guiding light clamping fixtures with 345.6 N of equal force.
Twin-Tool Actuation
Mount a secondary stopper or part pusher on the opposing rod end to perform two synchronized tasks in one stroke.
Symmetric Ejection
Push a part out and pull the mechanism back with identical 345.6 N thrust, ensuring stable ejection without rotational drift.
Is the Airtac MFD Double Rod Miniature Cylinder MFD32X15 the Right Cylinder?
When sizing this double-acting unit, compare the real 0.5 MPa outputs: the MFD25 yields 206.1 N, this MFD32 provides 345.6 N, and the MFD40 reaches 527.8 N. Choose the 32 mm bore when your application needs roughly 207 N of safe working force both ways. The twin-rod architecture inherently resists rotation and supports a secondary tool or stopper on the back rod.
Because this specific SKU lacks the -S magnet, it cannot accept position switches. Note that fixed TPU bumpers only decelerate the stroke end; they do not lock the piston. If you need to hold a load vertically during air loss, install an external rod lock or pilot check valve. Mounting options include LB foot, FA flange, and TC trunnion (no SDB).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFD Double Rod Miniature Cylinder MFD32X15 FAQ
The double-rod design provides equal force both ways using the rod-side area. It generates 345.6 N at 0.5 MPa, 483.8 N at 0.7 MPa, and a theoretical maximum of 70.5 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet and cannot accept CMSG, DMSG, or EMSG switches. You must select the -S variant for position sensing. The twin rods provide anti-rotation stability, and a rod exits both ends, so there is no back-cover or SDB mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MFD Double Rod Miniature Cylinder MFD32X15
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.