Airtac MFD Double Rod Miniature Cylinder MFD32X260S
The AirTAC Airtac MFD Double Rod Miniature Cylinder MFD32X260S is a genuine double acting, double rod JIS-standard round-body mini air cylinder with a Ø32mm bore and 260mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke260 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MFD Double Rod Miniature Cylinder MFD32X260S
With a rod extending from both covers, this JIS-standard round-body mini cylinder delivers 345.6 N of force in each direction at 0.5 MPa, making it ideal for pushing and pulling applications that demand symmetry. The twin rods also resist rotational torque, providing a steadier guide for sensitive tooling or sliding mechanisms.
The SUS304 stainless barrel and riveted aluminium covers keep the body compact and resistant to mild corrosion, while the built-in -S magnet allows CMSG, DMSG, or EMSG sensors to confirm piston position. At 260 mm stroke, this model handles a safe working load of about 207 N (60% of the 0.5 MPa force), making it a robust choice for automated assembly fixtures.
Airtac MFD Double Rod Miniature Cylinder MFD32X260S Technical Specifications
| Model | Airtac MFD Double Rod Miniature Cylinder MFD32X260S |
|---|---|
| Series | MFD JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MFD Double Rod Miniature Cylinder MFD32X260S
| MFD | JIS-standard round-body mini cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFD Double Rod Miniature Cylinder MFD32X260S Is Used
Push-Pull Transfer Unit
Use the equal 345.6 N force from both rods to transfer parts between two stations. The rear rod can trip a limit switch, confirming the cycle is complete.
Anti-Rotation Slide Guide
The twin rods prevent the load from rotating during travel. This provides a stable platform for guiding a sensor flag or a precision alignment pin in a fixture.
Twin-Tool Actuation
Mount a small stamp or punch on each rod end. The synchronized, equal force in both directions lets you perform two identical operations on a part simultaneously.
Is the Airtac MFD Double Rod Miniature Cylinder MFD32X260S the Right Cylinder?
Choose the MFD32X260S when you need equal force and guided motion in both directions. Compare with the MFD25 (206.1 N at 0.5 MPa) for lighter duty, or the MFD40 (527.8 N at 0.5 MPa) for significantly higher thrust. The double-rod design eliminates the need for external guides in many linear slides and provides a convenient mounting point on the rear rod for flags or secondary tooling.
This model does not hold its position on air loss-the piston will drift. For vertical lifts or loads that must stay put, add an external rod lock or a pilot-operated check valve. The fixed TPU bumper pads decelerate the stroke end, but they are not a brake. Select LB foot, FA flange, or TC trunnion mounting, and use the -S magnet with CMSG, DMSG, or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFD Double Rod Miniature Cylinder MFD32X260S FAQ
The force is equal in both directions because it is a double-rod cylinder. At 0.5 MPa it generates 345.6 N, and at 0.7 MPa it generates 483.8 N. The theoretical maximum is 70.5 kgf at 1.0 MPa.
The rod extending from both ends provides equal force for pushing and pulling, and the second rod acts as a built-in guide to resist rotation. This improves stability for sliding loads and offers a mounting point on the rear rod for sensors or flags. The built-in -S magnet enables position sensing with CMSG, DMSG, or EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MFD Double Rod Miniature Cylinder MFD32X260S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.