Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X100
The AirTAC Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X100 is a genuine double acting, double rod + cushion round-body mini air cylinder with a Ø32mm bore and 100mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting, double rod + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X100
Twin rods exit both covers of this stainless round-body mini cylinder, ensuring equal thrust in both directions while resisting rotation during fast moves. Fitted with an adjustable air cushion at each end, the MICD32X100 soaks up end-of-stroke shock at high speed, protecting your payload. The stainless barrel and rod offer mild corrosion resistance for washdown environments.
Delivering 345.6 N of force at 0.5 MPa and 483.8 N at 0.7 MPa through its 1/8 inch port, it provides a safe working load of about 207 N. Because this SKU lacks the -S magnet, it cannot take CMSG, DMSG or EMSG sensors. Note that the air cushion only decelerates the piston near stroke end; it does not lock or hold the load on air loss.
Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X100 Technical Specifications
| Model | Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X100 |
|---|---|
| Series | MICD mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X100
| MICD | round-body mini cylinder (double-rod, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X100 Is Used
Product Diverting
Pushes packages sideways on a high-speed belt using equal thrust both ways, while the adjustable cushion absorbs the shock of sudden stops.
Guided Clamping
Holds a workpiece securely during machining; the twin rods resist rotational twist and maintain alignment under 345.6 N of clamping force.
Flap Folding
Folds heavy carton flaps rapidly. The stainless build handles mildly humid packing areas, and the cushions prevent end-of-stroke impact damage.
Is the Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X100 the Right Cylinder?
For lighter duties, the MICD25 bore provides 206.1 N at 0.5 MPa, while the larger MICD40 offers 527.8 N for heavier loads. This 32 mm bore hits a strong middle ground. The double-rod plus adjustable cushion combination is ideal when you need guided, non-rotating motion with smooth deceleration at high speeds. If you need position feedback, select the -S magnet variant instead of this base model.
Mount using LB foot, FA flange or TC trunnion brackets; the SDB pivot block is not available on this double-rod design. For vertical loads, remember the cylinder drifts on air loss. Add an external rod lock or pilot check valve to hold position, as the cushion needle only decelerates and never brakes.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X100 FAQ
It delivers equal force both ways: 345.6 N at 0.5 MPa, 483.8 N at 0.7 MPa, and a maximum theoretical force of 70.5 kgf at 1.0 MPa. The air port is 1/8 inch.
No, this specific SKU lacks a magnet and cannot take CMSG, DMSG or EMSG sensors. You must order the -S variant for position sensing. The adjustable air cushions only decelerate the piston; they do not hold the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICD Cylinders
Request a Quote for Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.