Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X75
The AirTAC Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X75 is a genuine double acting, double rod + cushion round-body mini air cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, double rod + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X75
Twin rods exit both covers of this stainless round-body mini cylinder, ensuring identical push and pull thrust while resisting rotation. The MICD32X75 delivers 345.6 N of force at 0.5 MPa in both directions, aided by needle-adjustable air cushions at each end to decelerate high-speed strokes smoothly. Its stainless barrel and rod withstand mild corrosion and washdown environments.
Operating on a 1/8" port with a 12 mm rod and M10x1.25 thread, this 32 mm bore unit runs at 30-800 mm/s. Because a rod occupies both faces, the effective thrust is equal both ways. For sizing, a safe working load is roughly 207 N, which translates to lifting about 17.6 kg vertically with a 2:1 safety margin. This base SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG sensors without switching to the -S variant.
Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X75 Technical Specifications
| Model | Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X75 |
|---|---|
| Series | MICD mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X75
| MICD | round-body mini cylinder (double-rod, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X75 Is Used
Belt Diverter Arm
Drives a dual-sided sorting gate at high speed, using the twin rods to resist torsional twist while the air cushions absorb the end-of-stroke impact.
Carton Flap Folder
Folds heavy cardboard flaps simultaneously from both sides, relying on the 345.6 N equal thrust and needle-adjustable cushions to prevent crushing.
Pallet Stopper Gate
Acts as a raised stop barrier on a roller line, where the rear rod trips a mechanical flag and the front rod halts the 17.6 kg load smoothly.
Is the Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X75 the Right Cylinder?
When sizing this 32 mm bore model, step down to the MICD25 for lighter loads (206.1 N at 0.5 MPa) or step up to the MICD40 for heavier tasks (527.8 N at 0.5 MPa). The through-rod design with twin adjustable cushions is ideal when you need equal force both ways and shock-free stops at high travel speeds. Note that the air cushion only decelerates the piston near the stroke end; it does not lock or hold the load. If air pressure drops, the cylinder will drift, so add an external rod lock or pilot check valve for position holding.
Mount this non-ISO-6432 round-body cylinder using LB foot brackets, FA flanges or TC trunnions. The SDB pivot block is not compatible with this double-rod configuration. Additionally, because this specific SKU has no internal magnet, it cannot support position sensing without upgrading to an -S version.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X75 FAQ
It generates 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a theoretical maximum of 70.5 kgf at 1.0 MPa. Because it is a double-rod cylinder, this force is exactly equal in both directions. The unit features a 1/8" air port.
No, this specific SKU does not include a magnet, so it cannot host CMSG, DMSG or EMSG switches; you must select the -S variant for sensing. It features a stainless steel build and adjustable air cushions at both ends to absorb shock, but the cushion only decelerates the load and does not act as a brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICD Cylinders
Request a Quote for Airtac MICD Air Cushion Double Rod Mini Cylinder MICD32X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.