Airtac MICJ Adjustable Mini Cylinder MICJ20X100-30
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ20X100-30 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø20mm bore and 100mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ20X100-30
Trim the forward stop by up to 30 mm on site without swapping hardware: this AirTAC MICJ20X100-30 mini cylinder pairs an external extend adjuster with a needle-set air cushion at both ends to dial in the exact 70-100 mm extend position while soaking up high-speed shock. The stainless steel round barrel and M8 rod resist mild washdown corrosion, and the 1/8" port feeds a 20 mm bore that pushes 157 N at 0.5 MPa.
Built to the ISO 6432 mounting interface, it drops into standard mini brackets and clevises for easy retrofits. With a practical safe working load near 94 N, it moves roughly 8 kg vertically with a 2:1 safety margin. Note this SKU lacks the -S magnet, so it cannot host CMSG, DMSG or EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ20X100-30 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ20X100-30 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 100 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ20X100-30
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ20X100-30 Is Used
Light Press Tooling
Use the 157 N push force to seat small bearings, relying on the 30 mm extend trim to dial in the exact 70-100 mm closure depth without machining spacers.
Carton Flap Folding
Swing flaps at high speed and let the dual adjustable air cushions absorb the end-of-stroke shock, preventing dents while the external screw fixes the fold line.
Inline Diverter Gate
Divert lightweight packages on a belt; the 1/8" port cycles fast, and the ISO 6432 body drops right into existing mini-cylinder clevis brackets.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ20X100-30 the Right Cylinder?
If you need less force, the smaller Ø16 bore pushes just 100.5 N at 0.5 MPa and lacks the cushion build; stepping up to the Ø25 bore yields 245.3 N for heavier tooling. This Ø20 hits a 157 N sweet spot, and the 30 mm extend trim plus dual cushions excel in fast set-position moves where you must repeatedly hit a precise forward spot without impact bounce.
The stop screw sets the end position but is not a mid-stroke lock, and the piston will drift on air loss—add an external rod lock or pilot check valve for suspended loads. Mount via LB foot, FA flange or TC trunnion (SDB pivot block is not offered on this adjustable variant). Because this exact SKU has no -S magnet, position sensing is unavailable.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ20X100-30 FAQ
This 20 mm bore cylinder uses a 1/8" air port. It pushes 157 N and pulls 131.9 N at 0.5 MPa, pushes 219.8 N and pulls 184.7 N at 0.7 MPa, with a theoretical maximum force of 32 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 30 mm (usable extend 70-100 mm) while needle valves tune the air cushions at both ends to decelerate the piston. The cushions only slow travel near the ends and the screw is not a mid-stroke lock; the piston drifts on air loss, so use a pilot check valve for suspended loads. This non-S SKU has no magnet for sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ20X100-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.