Airtac MICJ Adjustable Mini Cylinder MICJ20X100-50S
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ20X100-50S is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø20mm bore and 100mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ20X100-50S
Dial in a precise forward stop on-site with the AirTAC MICJ20X100-50S, a double-acting stainless-steel round-body mini cylinder. An external screw trims the extend stroke by up to 50 mm, giving a usable forward range of 50 to 100 mm, while a needle-set adjustable air cushion at both ends absorbs high-speed shock. Driven by a 1/8" port and an Ø8 rod, it delivers 157 N of push force at 0.5 MPa, making its safe working load roughly 94 N, or about an 8 kg vertical lift with a 2:1 margin.
Built to the ISO 6432 mounting interface for Ø20 bores, this riveted stainless barrel and rod construction resists mild corrosion and washdown environments. The -S suffix indicates a built-in piston magnet, allowing you to mount CMSG, DMSG, or EMSG sensors for position detection. The extend adjuster and end cushions handle dynamic deceleration, but note that the cylinder does not hold position on air loss; use an external rod lock or pilot check valve for static holding.
Airtac MICJ Adjustable Mini Cylinder MICJ20X100-50S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ20X100-50S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 100 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ20X100-50S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ20X100-50S Is Used
Adjustable Push Fixture
Dial the extend stroke from 50 to 100 mm to seat delicate parts. The 157 N push force clamps securely while the air cushion prevents impact damage.
Dynamic Diverter Gate
Sort light packages on the fly. The 8 kg vertical lift capacity handles flap diversion, and the external stop screw lets you reposition the gate quickly.
Variable Stroke Sealing Head
Press carton seals at high cycle rates. The needle-set air cushion absorbs end shock, while the -S magnet confirms extend position for the PLC.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ20X100-50S the Right Cylinder?
When sizing this 20 mm bore, step down to the Ø16 bore if your load is under 100 N push at 0.5 MPa, or step up to the Ø25 bore (245 N push) if you need to move heavier fixtures. The MICJ20X100-50S is ideal when you need rapid, repeatable set-position moves; the external stop screw sets the exact extend endpoint without swapping cylinders, and the dual adjustable air cushions prevent end-of-stroke banging at speeds up to 800 mm/s. Mount using standard LB foot, FA flange, or TC trunnion brackets (SDB pivot-block is not available on this adjustable variant). Position detection is fully enabled via the -S magnet using CMSG, DMSG, or EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ20X100-50S FAQ
This 20 mm bore cylinder uses a 1/8" port and an Ø8 mm rod. It generates 157 N push and 131.9 N pull at 0.5 MPa, or 219.8 N push and 184.7 N pull at 0.7 MPa. The theoretical maximum force is 32 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 50 mm (usable range 50-100 mm); retract remains full. Needle valves adjust the air cushion at both ends to decelerate the piston near stroke ends. The -S suffix means it has a magnet for CMSG/DMSG/EMSG sensors. The stop screw is not a mid-stroke lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ20X100-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.