Airtac MICJ Adjustable Mini Cylinder MICJ20X150-10S
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ20X150-10S is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø20mm bore and 150mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ20X150-10S
Dial in the forward stop on-site without swapping hardware: the MICJ20X150-10S uses an external screw to shorten the extend end by up to 10 mm, giving a usable forward travel of 140-150 mm while retract remains full. A needle-set variable air cushion at both ends soaks up high-speed shock, letting you set the exact position and control the impact. It is a double-acting, round-body stainless-steel mini cylinder with a Ø8 mm piston rod and a 1/8" air port.
Built to the ISO 6432 mounting interface, this Ø20 bore drops into standard mini brackets and clevises. The stainless barrel and rod resist mild corrosion and washdown. Delivering 157 N of push force at 0.5 MPa, it handles a safe working load of roughly 94 N, or about 8 kg of vertical lift with a 2:1 margin. The -S suffix means a built-in piston magnet is present for CMSG, DMSG or EMSG position sensing.
Airtac MICJ Adjustable Mini Cylinder MICJ20X150-10S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ20X150-10S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ20X150-10S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ20X150-10S Is Used
Divert Gate Positioning
Trims the 150 mm extend stroke by 10 mm to hit a divert gate perfectly while the air cushion absorbs the high-speed impact of packages.
Carton Flap Folding
Handles the 94 N safe working load to fold flaps, using the adjustable forward stop to tune the crease depth without changing brackets.
Lab Dispense Head
Stainless construction survives wipe-downs while the needle cushion decelerates the 8 kg dispense head smoothly at the end of travel.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ20X150-10S the Right Cylinder?
Size this Ø20 bore against the adjacent options: step down to a Ø16 for lighter 100.5 N push tasks, or step up to a Ø25 when you need 245.3 N. The adjustable stop plus dual cushions shine in fast set-position moves where you must trim the forward endpoint precisely and decelerate smoothly. Remember the stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss. For a held load, specify an external rod lock or pilot check valve. Mount via LB, FA or TC (SDB is not offered on this variant), and match your sensors to the -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ20X150-10S FAQ
This Ø20 bore cylinder features a 1/8" air port and an M8x1.25 male rod thread. At 0.5 MPa it pushes 157 N and pulls 131.9 N. At 0.7 MPa it pushes 219.8 N and pulls 184.7 N. The theoretical maximum force is 32 kgf at 1.0 MPa.
An external screw shortens the extend end by up to 10 mm (usable forward travel 140-150 mm); retract stays full. A needle valve adjusts the variable air cushion at both ends to decelerate the piston near stroke end, though it is not a mid-stroke lock. The -S suffix indicates a built-in magnet for CMSG, DMSG or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ20X150-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.