Airtac MICJ Adjustable Mini Cylinder MICJ20X160-50
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ20X160-50 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø20mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ20X160-50
Trim the forward stop by up to 50 mm on site without swapping cylinders using the AirTAC MICJ20X160-50. This double-acting, round-body stainless-steel mini cylinder pairs that adjustable extend stroke with a needle-set air cushion at both ends to soak up high-speed shock. The 1/8" port and M8x1.25 male rod thread match standard ISO 6432 mini-cylinder mounting dimensions for easy bracket drops.
Delivering 157 N of push force at 0.5 MPa, it handles a safe working load of roughly 94 N or lifts about 8 kg vertically with a 2:1 margin. The stainless barrel and rod resist mild corrosion and washdown. Note this SKU lacks a magnet, so it cannot take CMSG/DMSG/EMSG sensors; choose the -S variant for position sensing.
Airtac MICJ Adjustable Mini Cylinder MICJ20X160-50 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ20X160-50 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 160 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ20X160-50
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ20X160-50 Is Used
Adjustable Sorting Diverter
Dial in the 110-160 mm extend stop to push 8 kg packages precisely on a conveyor without re-engineering the mount.
High-Speed Gate Control
Use the dual adjustable air cushions to absorb shock at 800 mm/s while timing the 50 mm extend trim for part release.
Washdown Stopper Arm
Leverage the stainless round-body build to halt 94 N workpiece loads in damp packaging areas without rusting.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ20X160-50 the Right Cylinder?
When sizing this 20 mm bore, step down to a 16 mm bore for lighter 100 N push tasks, or step up to a 25 mm bore for 245 N when this model maxes out. The 50 mm extend adjuster is ideal for fast set-position moves, letting you dial in the 110-160 mm usable forward length. The stop screw sets the end position but is not a mid-stroke lock; the cylinder drifts on air loss, so add an external rod lock or pilot check valve to hold a suspended load. Mount via LB foot, FA flange, or TC trunnion (SDB pivot-block is not available), and use the CA, U, R, or CM back covers to fit your frame.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ20X160-50 FAQ
This 20 mm bore cylinder features a 1/8" port and generates 157 N push / 131.9 N pull at 0.5 MPa, 219.8 N push / 184.7 N pull at 0.7 MPa, and a theoretical max of 32 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 50 mm (retract stays full), while the needle-set air cushions at both ends only decelerate the piston near stroke end. It does not hold position on air loss, and this non-S SKU cannot take magnetic sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ20X160-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.