Airtac MICJ Adjustable Mini Cylinder MICJ20X60-10
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ20X60-10 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø20mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ20X60-10
Trimming the forward stop by up to 10 mm on site, the AirTAC MICJ20X60-10 lets you dial in a 50 to 60 mm extend position without swapping hardware. This double-acting round-body mini cylinder pairs that on-site adjustability with a needle-set variable air cushion at both ends, soaking up high-speed shock to protect your tooling. The stainless-steel barrel and piston rod supply reliable mild corrosion and washdown resistance.
Delivering 157 N of push force at 0.5 MPa, it handles a safe working load of roughly 94 N or lifts about 8 kg vertically with a 2:1 margin. The Ø20 mm body uses the ISO 6432 mounting interface for standard mini brackets and features a 1/8" port with an M8x1.25 male rod thread. Note this SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ20X60-10 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ20X60-10 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ20X60-10
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ20X60-10 Is Used
Light Part Clamping
Dial in the 10 mm extend stop to grip delicate components precisely, using the 157 N push force without crushing the part.
Package Diverting
Absorb the shock of fast diverting strokes on packaging lines using the adjustable air cushion while moving roughly 8 kg loads.
Component Insertion
Press small bearings or pins into housings at speed, relying on the tuned end cushion to soften the final impact safely.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ20X60-10 the Right Cylinder?
When sizing this 20 mm bore, step down to the 16 mm version if your load is light, but expect push force to drop to 100.5 N at 0.5 MPa. If you need more muscle, the 25 mm bore pushes 245.3 N at 0.5 MPa. The MICJ20X60-10 shines in fast set-position moves where the 10 mm extend trim and adjustable end cushions prevent harsh impacts. Choose LB foot, FA flange or TC trunnion mounts, as the SDB pivot block is unavailable here.
Remember that the stop screw sets the end position but acts as no mid-stroke lock. The cylinder will drift on air loss, and the cushion only decelerates near the stroke end. For a securely held load, install an external rod lock or pilot-operated check valve. Add the -S magnet variant if you require position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ20X60-10 FAQ
This double-acting cylinder pushes 157 N and pulls 131.9 N at 0.5 MPa, and pushes 219.8 N while pulling 184.7 N at 0.7 MPa. The theoretical max force is 32 kgf at 1.0 MPa. It uses a 1/8" air port and an M8x1.25 male rod thread.
An external stop screw shortens the extend stroke by up to 10 mm on site, letting you set a precise forward end position. A needle-set variable air cushion at both ends decelerates the piston near stroke ends to reduce high-speed shock. This SKU has no magnet, so it cannot support sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ20X60-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.