Airtac MICJ Adjustable Mini Cylinder MICJ25X25-10S
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ25X25-10S is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø25mm bore and 25mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ25X25-10S
Trim the forward stop by up to 10 mm on site without swapping hardware using this AirTAC MICJ25X25-10S mini cylinder. The external screw shortens the extend end position only, while a needle-set variable air cushion at both ends absorbs high-speed shock. It is a double-acting, round-body stainless steel unit that drops directly into standard ISO 6432 mini-cylinder brackets and clevises.
At 0.5 MPa it delivers 245.3 N of push force and 206.1 N of pull force, translating to a safe working load of roughly 147 N or a 12.5 kg vertical lift with a 2:1 margin. The Ø25 bore uses a 1/8" port and a M10x1.25 male rod thread. Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG or EMSG position sensing.
Airtac MICJ Adjustable Mini Cylinder MICJ25X25-10S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ25X25-10S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 25 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ25X25-10S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ25X25-10S Is Used
Repeatable Forming Stop
Dial in the exact 15-25 mm extend position for a light metal forming press, using the 10 mm adjuster to set the forward stop while the dual air cushions absorb the 245 N high-speed impact.
Package Diverter Arm
Sort cartons on a line by swinging a gate at the precise extend endpoint, relying on the ISO 6432 mount for easy bracket swaps and the built-in magnet for exact timing.
Vertical Lift Gate
Raise and lower a lightweight 12 kg access flap using the 0.5 MPa push force, tuning the cushion needle to prevent slamming at the top of the 25 mm stroke.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ25X25-10S the Right Cylinder?
If your set-position move needs less push, the smaller Ø20 MICJ bore provides 157 N at 0.5 MPa; if you need more power, stepping up to the Ø32 bore yields 402 N. This Ø25 model hits a strong middle ground for fast, repeatable stops where tuning out the end-of-stroke impact is critical. The adjustable needle cushions the hit, but it only decelerates the piston—it is not a mid-stroke lock or brake.
For mounting, select LB foot, FA flange or TC trunnion brackets (the SDB pivot-block is not offered on this adjustable variant). Remember that a plain cylinder drifts on air loss; to hold a suspended load securely during a pressure drop, add an external rod lock or pilot-operated check valve rather than relying on the cushion.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ25X25-10S FAQ
This double-acting cylinder pushes with 245.3 N and pulls with 206.1 N at 0.5 MPa. At 0.7 MPa, push increases to 343.4 N and pull to 288.5 N, with a theoretical maximum of 50 kgf at 1.0 MPa. The Ø25 bore features a 1/8" air port and a M10x1.25 male rod thread.
An external screw shortens the extend stroke by up to 10 mm on site, giving a usable 15-25 mm forward range, while the needle-set variable air cushion at both ends decelerates the piston near stroke end to soak up high-speed shock. The -S suffix means a piston magnet is built in for CMSG/DMSG/EMSG sensors. The stop screw and cushion only manage end-of-stroke movement; they do not lock or hold the load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ25X25-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.