Airtac MICJ Adjustable Mini Cylinder MICJ25X250-75
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ25X250-75 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø25mm bore and 250mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke250 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ25X250-75
Trim the forward stop by up to 75 mm on site without swapping hardware using this AirTAC MICJ25X250-75 mini cylinder. The external screw shortens the extend end position (usable forward range 175-250 mm), while a needle-set variable air cushion at both ends soaks up high-speed shock. Built as a double-acting, round-body stainless unit, it carries a 1/8" port and a Ø10 mm rod with an M10x1.25 male thread.
The Ø25 bore generates 245.3 N of push force at 0.5 MPa, translating to a safe working load of roughly 147 N or a 12.5 kg vertical lift with a 2:1 margin. Because this SKU lacks the -S magnet, it cannot host CMSG, DMSG or EMSG sensors. It uses the ISO 6432 mounting interface for standard mini brackets, and the stainless barrel and rod resist mild washdown corrosion.
Airtac MICJ Adjustable Mini Cylinder MICJ25X250-75 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ25X250-75 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 250 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ25X250-75
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ25X250-75 Is Used
Adjustable Pressing
Dial in a 175-250 mm forward pressing stroke to seat components precisely using the 245.3 N push force, relying on the dual air cushions to absorb impact at high speed.
Dynamic Diverting
Extend a diverter arm to a tuned end point without swapping cylinders; the 1/8" ported Ø25 bore delivers reliable force while the needle cushion softens the stop.
Vertical Lift Stops
Lift roughly 12.5 kg of inventory and fine-tune the extend reach by up to 75 mm, ensuring gentle deceleration at the top without harsh mechanical banging.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ25X250-75 the Right Cylinder?
For lighter duty, the Ø20 bore provides 157 N of push at 0.5 MPa; for heavier demands, the Ø32 bore steps up to 402 N. Choose this Ø25 model when you need 245.3 N of push combined with on-the-fly extend tuning and high-speed shock absorption. The stop screw sets the end position but is not a mid-stroke lock, and the cylinder will drift on air loss, so add an external rod lock or pilot check valve to hold a suspended load. Mount via LB foot, FA flange or TC trunnion, as the SDB pivot block is not offered on adjustable-stroke variants.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ25X250-75 FAQ
This double-acting cylinder features a 1/8" port and delivers 245.3 N push / 206.1 N pull at 0.5 MPa, 343.4 N push / 288.5 N pull at 0.7 MPa, with a theoretical max of 50 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 75 mm (retract remains full), and needle-set air cushions at both ends decelerate the piston near stroke end. The stop screw is not a mid-stroke lock, the cushion is not a brake, and the piston will drift on air loss; use an external rod lock to hold a load. This non-S SKU cannot take a sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ25X250-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.