Airtac MICJ Adjustable Mini Cylinder MICJ25X30-30
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ25X30-30 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø25mm bore and 30mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ25X30-30
Dial in the forward stop on site without swapping hardware: the AirTAC MICJ25X30-30 uses an external screw to shorten the extend end position by up to 30 mm, while a needle-set adjustable air cushion at both ends soaks up high-speed shock. Built as a stainless-steel round-body mini cylinder with a 10 mm piston rod and 1/8" port, it delivers 245.3 N of push force at 0.5 MPa. The stainless barrel and rod resist mild corrosion and washdown environments, and the Ø25 body conforms to the ISO 6432 mounting interface for standard mini brackets.
With a safe working load of roughly 147 N (about 60% of its 0.5 MPa push rating), this double-acting actuator moves approximately 12.5 kg vertically with a 2:1 safety margin. The 30 mm nominal stroke is fully adjustable down to zero extend, and the retract stroke remains full length. Note this SKU lacks a magnet and cannot accept CMSG/DMSG/EMSG sensors; order the -S variant if position sensing is required.
Airtac MICJ Adjustable Mini Cylinder MICJ25X30-30 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ25X30-30 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 30 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ25X30-30
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ25X30-30 Is Used
Dial-in Clamping Press
Sets a precise 10-30 mm extend clamping reach on machined parts, using the 245 N force to hold firmly while the air cushion prevents end-stroke impact.
Variable Stroke Diverter
Sorts packages of varying widths on a line by tweaking the extend stop up to 30 mm on site, decelerating the 12.5 kg load smoothly via the needle cushion.
Washdown Carton Stop
Halts cartons entering a washdown zone; the stainless build resists moisture while the forward screw dials the stopping distance to match box size.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ25X30-30 the Right Cylinder?
Size this bore against the adjacent options: the smaller Ø20 MICJ yields 157 N push at 0.5 MPa, while the larger Ø32 provides 402 N. The Ø25 hits a solid middle ground at 245.3 N, ideal when you need to move about 12.5 kg vertically with a 2:1 margin. Choose this adjustable-stroke model when you need to set a precise forward position on the fly and use the dual-end air cushions to decelerate fast moves without slamming. Mount using LB foot, FA flange, or TC trunnion (the SDB pivot block is not offered on this adjustable variant). Remember the stop screw sets the end position only; it is not a mid-stroke lock. If the machine loses air, the piston drifts, so add an external rod lock or pilot check valve to hold a suspended load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ25X30-30 FAQ
This Ø25 mm bore cylinder features a 1/8" air port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, and 343.4 N push / 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
An external stop screw shortens the extend stroke by up to 30 mm on site; the retract stroke remains fixed. Needle valves adjust the air cushion at both ends to decelerate high-speed moves, but this is not a mid-stroke lock. This specific SKU has no magnet and cannot take sensors; the -S version is required for CMSG/DMSG/EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ25X30-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.