Airtac MICJ Adjustable Mini Cylinder MICJ25X75-10
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ25X75-10 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ25X75-10
Dial in your forward stop on-site with the AirTAC MICJ25X75-10, a stainless-steel round-body mini cylinder featuring a 10mm adjustable extend stroke. An external stop screw lets you shorten the extend end position down to 65mm without swapping hardware, while a needle-set variable air cushion at both ends soaks up high-speed shock. This double-acting actuator delivers 245.3N of push force at 0.5 MPa and drops directly into standard ISO 6432 mini-cylinder mounting brackets.
Built with a mildly corrosion-resistant stainless barrel and rod, it handles washdown environments and moves a safe working load of roughly 147N. The Ø25 bore uses a 1/8" port and an M10x1.25 male rod thread. Note that this specific SKU lacks a magnet and cannot host CMSG, DMSG, or EMSG sensors; order the -S variant if position sensing is required. The cushion only decelerates near the stroke end and does not function as a mid-stroke lock.
Airtac MICJ Adjustable Mini Cylinder MICJ25X75-10 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ25X75-10 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ25X75-10
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ25X75-10 Is Used
Adjustable Diverter
Fine-tune the 65-75mm extend reach on a conveyor sorting arm to handle varying package sizes without changing the cylinder.
High-Speed Clamping
Leverage the dual air cushions to decelerate a 245N clamping force rapidly, preventing impact damage on metal parts.
Washdown Positioning
Utilize the stainless steel construction for a mildly corrosive testing station, setting the exact forward stop for a sensor probe.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ25X75-10 the Right Cylinder?
When sizing this 25mm bore, stepping down to the 20mm bore drops your 0.5 MPa push force to 157N, while stepping up to the 32mm bore increases it to 402N. Choose this model when you need precise extend positioning paired with high-speed shock absorption. The external screw sets the forward end position but is not a mid-stroke lock; if your application must hold a load on air loss, install an external rod lock or pilot-operated check valve. Mount using LB foot, FA flange, or TC trunnion brackets, as the SDB pivot-block is not available on this adjustable variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ25X75-10 FAQ
This double-acting cylinder features a 1/8" port and an M10x1.25 male rod thread. It delivers 245.3N push and 206.1N pull at 0.5 MPa, 343.4N push and 288.5N pull at 0.7 MPa, with a theoretical maximum of 50 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 10mm on-site, giving a usable 65-75mm forward range while retract remains full. Needle valves adjust the variable air cushion at both ends to absorb high-speed shock; this only decelerates near the end of travel and does not lock the piston. This SKU has no magnet, so it cannot support position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ25X75-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.