Airtac MICJ Adjustable Mini Cylinder MICJ25X75-20S
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ25X75-20S is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ25X75-20S
Trim the forward stop by up to 20 mm on site without swapping hardware using this AirTAC MICJ25X75-20S round-body mini cylinder. The external screw shortens the extend end position from its 75 mm nominal maximum down to 55 mm, while a needle-set adjustable air cushion at both ends soaks up high-speed shock. It is a double-acting, stainless-steel riveted unit that drops directly into standard ISO 6432 mini-cylinder mounting brackets and clevises.
The Ø25 bore delivers 245.3 N of push force at 0.5 MPa, yielding a safe working load of roughly 147 N or a vertical lift capacity of about 12.5 kg with a 2:1 margin. The 1/8" air port feeds a 30-800 mm/s speed range, and the built-in magnet (-S) enables position sensing with CMSG, DMSG, or EMSG switches. The stainless barrel and rod resist mild corrosion and washdown environments.
Airtac MICJ Adjustable Mini Cylinder MICJ25X75-20S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ25X75-20S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ25X75-20S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ25X75-20S Is Used
Adjustable Clamping Press
Dial in a precise 55 to 75 mm clamping forward stop to seat components delivering 245 N of push force, relying on the dual air cushions to absorb shock during rapid cycling.
Variable Position Divertor
Fine-tune the extend length on the fly to deflect varying package sizes on a conveyor, using the 12.5 kg vertical lift capacity to actuate routing gates reliably.
Washdown Carton Stopper
Deploy the stainless steel construction in mildly corrosive packaging lines, setting a repeatable end position while the needle cushion prevents harsh impact at 800 mm/s.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ25X75-20S the Right Cylinder?
When sizing this 245.3 N @0.5 MPa unit, step down to the Ø20 bore if your application only requires 157 N, or step up to the Ø32 bore (402.2 N @0.5 MPa) if heavier payloads exceed 147 N of safe working load. The 20 mm extend adjuster paired with the dual air cushions is specifically valuable for fast, settable-position moves where you must dial in a precise forward stop and control impact without changing the cylinder.
Because this is an adjustable-stroke variant, the SDB pivot-block is not available; use LB foot, FA flange, or TC trunnion mounts instead. The stop screw sets only the end position and the cushions only decelerate near stroke end—neither acts as a mid-stroke lock. The piston will drift on air loss, so install an external rod lock or pilot-operated check valve if you need to hold a suspended load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ25X75-20S FAQ
This double-acting cylinder uses a 1/8" air port and generates 245.3 N push / 206.1 N pull at 0.5 MPa, and 343.4 N push / 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 20 mm (usable range 55-75 mm), while the needle-set air cushion at both ends decelerates the piston near stroke ends. The -S magnet enables CMSG/DMSG/EMSG sensors. The cylinder does not hold position on air loss and drifts; use an external rod lock for suspended loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ25X75-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.