Airtac MICJ Adjustable Mini Cylinder MICJ25X75-50S
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ25X75-50S is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ25X75-50S
Trim the forward stop by up to 50 mm on site without swapping hardware: the MICJ25X75-50S uses an external screw to shorten the extend end position from its 75 mm nominal down to 25 mm, while the retract stroke remains full. The built-in needle valves provide an adjustable air cushion at both ends to soak up high-speed shock, letting you set the exact impact and position independently.
Built as a stainless-steel round-body mini cylinder, the riveted barrel and Ø10 rod resist mild corrosion and washdown. It conforms to the ISO 6432 mounting interface for simple bracket drops. Generating 245.3 N of push force at 0.5 MPa, it yields a safe working load of about 147 N, moving roughly 12.5 kg vertically with a 2:1 margin. The -S suffix means a piston magnet is installed for CMSG, DMSG or EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ25X75-50S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ25X75-50S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ25X75-50S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ25X75-50S Is Used
Variable Stroke Carton Flap Folding
Dial the extend stop in 25-75 mm to fold varying box flap heights on the fly, using the air cushion to soften the 245 N impact at high cycle rates.
Adjustable Transfer Diverter
Set the exact forward position to deflect packages of different widths without changing brackets, relying on the 12.5 kg vertical lift capacity.
Light Press Fit Station
Trim the extend end to press small bearings precisely, letting the dual needle cushions absorb the end-of-stroke shock for delicate parts.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ25X75-50S the Right Cylinder?
Size this bore against its neighbours: the Ø20 generates 157 N of push at 0.5 MPa, while the Ø32 jumps to 402 N. Pick the Ø25 when your load sits near that 147 N safe working figure and you need precise end-position tuning. The external stop screw and dual cushions shine in fast set-position moves where you must dial in a specific forward spot and decelerate smoothly without slamming.
The stop screw sets the end position but is not a mid-stroke lock; if air drops, the piston drifts, so add an external rod lock or pilot check valve to hold a suspended load. Mount via LB foot, FA flange or TC trunnion (the SDB pivot block is not offered on this adjustable variant). Because this is an -S SKU, you can fit CMSG, DMSG or EMSG switches directly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ25X75-50S FAQ
This double-acting cylinder has a 1/8 inch air port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, or 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 50 mm (usable extend 25-75 mm); retract remains full. Needle valves provide an adjustable air cushion at both ends to decelerate high-speed moves, but this is not a mid-stroke lock. The piston drifts on air loss, so use an external rod lock for suspended loads. The -S magnet enables CMSG, DMSG and EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ25X75-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.