Airtac MICJ Adjustable Mini Cylinder MICJ32X100-100
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X100-100 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 100mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X100-100
Dial in the forward stop on site without swapping cylinders: the MICJ32X100-100 uses an external screw to shorten the extend stroke by up to 100 mm, while a needle-set variable air cushion at both ends soaks up high-speed shock. This round-body stainless-steel mini cylinder delivers a robust 402.2 N push force at 0.5 MPa.
Built with a stainless barrel and rod for mild corrosion resistance, this double-acting unit features a 1/8" port and a 12 mm rod. It provides a computed safe working load of roughly 241 N, moving about 20.5 kg vertically with a 2:1 safety margin. Note this non-magnetic SKU cannot take a sensor; the -S variant is required for CMSG/DMSG/EMSG switches.
Airtac MICJ Adjustable Mini Cylinder MICJ32X100-100 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X100-100 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X100-100
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X100-100 Is Used
Press Fit Tooling
Delivers 402.2 N to seat small bearings, using the 100 mm extend adjustment to set precise contact depth without reprogramming the machine cycle.
Pallet Diverter
Shifts roughly 20.5 kg loads at speed onto a side lane, relying on the adjustable air cushions to halt the 12 mm rod smoothly without slamming the end cap.
Flap Folding Arm
Stainless construction handles washdown environments, while the on-site stroke reduction lets operators tweak the fold arm reach for varying carton widths.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X100-100 the Right Cylinder?
When sizing, step down to the Ø25 bore for lighter duties (245.3 N push @0.5 MPa) or up to the Ø40 if you need more thrust (628.3 N push @0.5 MPa). The Ø32 hits a sweet spot for fast set-position moves where the adjustable forward stop and twin cushions prevent end-of-stroke banging.
Mount using LB foot, FA flange, or TC trunnion brackets, as the SDB pivot-block is not offered on this adjustable variant. Remember that the stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, so fit an external rod lock or pilot check valve to hold a suspended load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X100-100 FAQ
This 32 mm bore cylinder has a 1/8" port and generates 402.2 N push / 345.6 N pull at 0.5 MPa, and 563 N push / 483.8 N pull at 0.7 MPa. Its theoretical maximum force is 82 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 100 mm, and needle valves tune the variable air cushion at both ends to decelerate high-speed impacts. The cushion only slows the piston near stroke end—it is not a brake; the cylinder cannot hold a load on air loss and this non-S SKU cannot take a sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X100-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.