Airtac MICJ Adjustable Mini Cylinder MICJ32X100-100S
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X100-100S is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 100mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X100-100S
Dial in a precise forward stop on-site with the AirTAC MICJ32X100-100S, a round-body stainless-steel mini cylinder that lets you shorten the extend stroke by up to 100 mm via an external screw. The retract stroke remains full, while the adjustable extend end lets you set exact positions without swapping hardware. An adjustable air cushion at both ends soaks up high-speed shock, and the built-in magnet (-S) supports CMSG, DMSG, or EMSG sensors for position feedback.
Built with a riveted stainless-steel barrel and a Ø12 mm piston rod, this double-acting actuator resists mild corrosion and handles washdown environments. It delivers 402.2 N of push force and 345.6 N of pull force at 0.5 MPa, yielding a safe working load of about 241 N or a vertical lift capacity of roughly 20.5 kg with a 2:1 margin. The 1/8" port feeds the bore efficiently across its 30-800 mm/s speed range.
Airtac MICJ Adjustable Mini Cylinder MICJ32X100-100S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X100-100S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X100-100S
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X100-100S Is Used
Press Fit Dial-In
Set a precise 0-100 mm extend stop for pressing bearings, using the adjustable end position to handle varying part thicknesses without retooling the line.
High-Speed Diverting
Use the 402.2 N push force to divert heavier pallets at speed, relying on the dual adjustable air cushions to absorb impact and prevent end-cap damage.
Washdown Lift Stop
Lift roughly 20 kg loads in humid or rinse-down zones using the stainless steel construction, trimming the forward stop to avoid overshooting the drop point.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X100-100S the Right Cylinder?
When sizing this 32 mm bore, stepping down to a 25 mm bore drops the 0.5 MPa push force to 245.3 N, while stepping up to a 40 mm bore increases it to 628.3 N. Choose this model when you need substantial thrust combined with on-the-fly extend positioning and shock absorption for fast cycling. The adjustable air cushion only decelerates the piston near the stroke end; it is not a mid-stroke lock, so add an external rod lock or pilot check valve if you must hold a suspended load on air loss.
Mounting options include LB foot, FA flange, and TC trunnion, but the SDB pivot block is not available on this adjustable-stroke variant. Because this SKU includes the -S magnet, you can directly mount CMSG, DMSG, or EMSG switches for reed or electronic sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X100-100S FAQ
At 0.5 MPa it provides 402.2 N push and 345.6 N pull; at 0.7 MPa it provides 563 N push and 483.8 N pull. The theoretical max force is 82 kgf at 1.0 MPa, and the air port size is 1/8".
An external screw shortens the extend stroke by up to 100 mm on-site, while needle-set adjustable air cushions at both ends decelerate the piston at high speed. The cushion only dampens impact near the end of travel—it is not a mid-stroke lock or brake, so the piston will drift on air loss unless you add an external rod lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X100-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.