Airtac MICJ Adjustable Mini Cylinder MICJ32X15-20
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X15-20 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 15mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke15 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X15-20
Trimming the forward end by up to 20 mm on-site, this round-body stainless mini cylinder lets you dial in a 0-15 mm extend position without swapping hardware. The double-acting build pushes with 402.2 N at 0.5 MPa, while a needle-set variable air cushion at both ends soaks up high-speed shock. The Ø32 mm bore uses a 1/8" port and a Ø12 mm rod with an M10x1.25 male thread.
The stainless barrel and rod resist mild washdown corrosion. Because this SKU lacks the -S magnet, it cannot host CMSG, DMSG or EMSG sensors. Note that Ø32 is a non-ISO-6432 size. The external screw sets the end stop but is not a mid-stroke lock; the piston drifts on air loss.
Airtac MICJ Adjustable Mini Cylinder MICJ32X15-20 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X15-20 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X15-20
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X15-20 Is Used
Short-Stroke Clamping
Apply 402.2 N of push force to clamp parts, tweaking the exact 0-15 mm forward stop on the fly to suit different material thicknesses.
High-Speed Sealing
Plunge and seal cartons rapidly; the dual adjustable air cushions absorb the impact at the extend end to protect the packaging film.
Transfer Gate Diverting
Actuate a sorting gate with a 1/8" ported cylinder, fine-tuning the extend reach by up to 20 mm to match varying product widths.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X15-20 the Right Cylinder?
For lighter work, the Ø25 bore yields 245.3 N of push at 0.5 MPa, whereas stepping up to the Ø40 bore provides 628.3 N. Here, the 20 mm extend adjuster plus dual cushions shine in fast set-position moves. With a safe working load around 241 N (roughly 60% of the 0.5 MPa push force), it handles about 20.5 kg vertically with a 2:1 margin.
Mount using LB foot, FA flange or TC trunnion brackets, as the SDB pivot-block is unavailable for this adjustable variant. To hold a load on air loss, add an external rod lock or pilot check valve—the cushion only decelerates near the stroke end.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X15-20 FAQ
This double-acting Ø32 bore cylinder features a 1/8" port. It delivers 402.2 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 20 mm (usable 0-15 mm) without affecting the full retract. Needle valves adjust the air cushions at both ends to decelerate high-speed moves. This non-SKU has no magnet for sensors, and the stainless build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X15-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.