Airtac MICJ Adjustable Mini Cylinder MICJ32X160-100
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X160-100 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X160-100
Dial in your forward stop on-site without swapping hardware: the AirTAC MICJ32X160-100 uses an external screw to shorten the extend stroke by up to 100 mm, giving a usable forward range of 60 to 160 mm. This double-acting, round-body stainless steel mini cylinder pairs that positional flexibility with a needle-set adjustable air cushion at both ends to soak up high-speed shock.
Driven by a 32 mm bore and a 1/8" port, it delivers 402.2 N of push force at 0.5 MPa. The stainless barrel and rod resist mild corrosion and washdown, making it a robust choice for demanding cycles. This specific SKU lacks a magnet, so it cannot host CMSG, DMSG, or EMSG sensors; choose the -S variant if you require position detection.
Airtac MICJ Adjustable Mini Cylinder MICJ32X160-100 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X160-100 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X160-100
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X160-100 Is Used
Sorting Diverter
Tune the 100 mm extend stop to match varying package sizes on the fly while the air cushion silently absorbs the impact of fast 402.2 N routing strokes.
Carton Flap Folder
Set a precise 60 to 160 mm forward reach for different carton depths. The stainless build handles dusty or mildly humid packing environments effortlessly.
Light Press Operation
Apply up to 241 N of safe working pressure for seating small components. Adjust the needle valve to prevent bounce when the rod reaches the modified endpoint.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X160-100 the Right Cylinder?
When sizing this unit, consider the force step: the smaller 25 mm bore yields 245.3 N of push at 0.5 MPa, while the larger 40 mm bore provides 628.3 N. The MICJ32X160-100 hits a sweet spot, offering a safe working load of roughly 241 N (about 60% of its 0.5 MPa push force) or a vertical lift capacity near 20.5 kg with a 2:1 safety margin. The 100 mm extend adjuster is ideal for fast set-position moves where you need to tune the endpoint without mechanical rework.
Remember that the external screw sets the end position but acts purely as a stop, not a mid-stroke lock. The cylinder will drift on air loss, and the air cushion only decelerates the piston near the end of travel. For mounting, you can use LB foot, FA flange, or TC trunnion brackets, but the SDB pivot-block is not available on this adjustable-stroke build.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X160-100 FAQ
This 32 mm bore cylinder features a 1/8" air port. At 0.5 MPa it provides 402.2 N of push force and 345.6 N of pull force. At 0.7 MPa, push increases to 563 N and pull to 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 100 mm, while a needle valve adjusts the air cushion at both ends to decelerate the piston at high speeds. This SKU has no magnet and cannot accept sensors; you need the -S version for CMSG, DMSG, or EMSG switches. The stop screw is not a mid-stroke lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X160-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.