Airtac MICJ Adjustable Mini Cylinder MICJ32X160-10S
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X160-10S is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X160-10S
Dial in the exact forward stop on-site with the AirTAC MICJ32X160-10S, a round-body stainless steel mini cylinder featuring a 10 mm adjustable extend stroke. An external stop screw trims the forward end position down to 150 mm without swapping hardware, while a needle-set variable air cushion at both ends soaks up high-speed shock. The retract stroke remains fixed at the full 160 mm.
Driven by a 32 mm bore and a 1/8" port, it delivers 402.2 N of push force at 0.5 MPa, yielding a safe working load of roughly 241 N or a 20.5 kg vertical lift with a 2:1 margin. The riveted stainless barrel and M10x1.25 male rod thread resist mild washdown corrosion. Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG or EMSG position switches.
Airtac MICJ Adjustable Mini Cylinder MICJ32X160-10S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X160-10S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X160-10S
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X160-10S Is Used
Divert Gate Actuation
Handles fast conveyor diverting loads up to 241 N safely, using the 10 mm extend trim to fine-tune the gate landing without mechanical shims.
Carton Flap Folding
Folds heavy packaging flaps at speed; the dual variable air cushions absorb the 402.2 N impact energy at the 160 mm stroke end to prevent denting.
Pallet Stopper Arm
Halts pallets on a roller line; the stainless build survives dusty environments and the stop screw sets the exact 150-160 mm blocking position.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X160-10S the Right Cylinder?
For lighter 0.5 MPa pushes around 245 N, step down to the Ø25 bore; if you need more force, the Ø40 bore pushes 628 N. At 32 mm, this cylinder hits a strong middle ground. The adjustable 10 mm extend stop plus dual air cushions are ideal for fast, settable-position moves, but note the cushion only decelerates near the stroke end—it is not a mid-stroke lock. If the load must hold position on air loss, add an external rod lock or pilot check valve.
Mount this variant using LB foot, FA flange or TC trunnion brackets, plus CA, U, R or CM back covers. The SDB pivot block is not offered on this adjustable-stroke series. Position sensing is enabled out of the box via the built-in magnet for CMSG/DMSG/EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X160-10S FAQ
This 32 mm bore cylinder uses a 1/8" port. At 0.5 MPa it pushes 402.2 N and pulls 345.6 N. At 0.7 MPa it pushes 563 N and pulls 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 10 mm (usable 150-160 mm), while needle valves tune the variable air cushions at both ends to decelerate high-speed impacts. The -S magnet enables CMSG/DMSG/EMSG sensors. The cylinder drifts on air loss, so use an external rod lock for load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X160-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.