Airtac MICJ Adjustable Mini Cylinder MICJ32X175-30
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X175-30 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 175mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X175-30
Trim the forward stop by up to 30 mm right on the machine with the AirTAC MICJ32X175-30, giving a usable extend range of 145-175 mm without swapping cylinders. This double-acting, round-body stainless steel mini cylinder pairs that external screw with a needle-set adjustable air cushion at both ends to soak up high-speed shock, letting you set the position and control the impact simultaneously.
Built with a stainless barrel and rod for mild washdown resistance, this Ø32 unit pushes with 402.2 N of force at 0.5 MPa (pulling 345.6 N). It yields a safe working load of roughly 241 N, or a vertical lift of about 20.5 kg with a 2:1 safety margin. It uses a 1/8" port and an M10x1.25 male rod thread. Note this specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG or EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ32X175-30 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X175-30 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X175-30
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X175-30 Is Used
Package Diverting
Handles 20 kg cartons at high speed on a sorting line, using the 30 mm extend adjustment to dial in the exact pusher distance while the air cushion absorbs the impact.
Pallet Positioning
Pushes light pallets into a wrapping station, relying on the 402.2 N force and the adjustable forward stop to align loads without overshooting.
Press Fit Tooling
Drives small bearings into housings, using the needle-set cushion to decelerate the 175 mm stroke smoothly and prevent part damage at the end of travel.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X175-30 the Right Cylinder?
When sizing this 32 mm bore, stepping down to a Ø25 MICJ drops the 0.5 MPa push force to 245.3 N, while stepping up to a Ø40 raises it to 628.3 N. Choose this model when you need those 400 N of push combined with fast, settable end-positions, letting the cushion absorb the shock of rapid 30-800 mm/s moves.
Mount using LB foot, FA flange or TC trunnion brackets (the SDB pivot-block is not available on this adjustable variant). Remember the stop screw only sets the extend end position—it is not a mid-stroke lock. Because a plain cylinder drifts on air loss, add an external rod lock or pilot check valve if the load must be held.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X175-30 FAQ
This double-acting cylinder delivers a push of 402.2 N and a pull of 345.6 N at 0.5 MPa. At 0.7 MPa, push is 563 N and pull is 483.8 N, with a theoretical max of 82 kgf at 1.0 MPa. It features a 1/8" air port and a Ø12 mm piston rod.
An external screw shortens the extend stroke by up to 30 mm on-site, while the needle-set air cushion at both ends decelerates the piston near the end of travel to absorb shock. This SKU has no -S magnet and cannot take sensors. The cushion only decelerates; it does not lock or hold the load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X175-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.