Airtac MICJ Adjustable Mini Cylinder MICJ32X175-40
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X175-40 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 175mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X175-40
Dial in exact forward stops on-site with the AirTAC MICJ32X175-40, a round-body stainless-steel mini cylinder featuring a 40 mm adjustable extend stroke. An external stop screw lets you trim the forward end position from 135 to 175 mm without swapping hardware, while a needle-set adjustable air cushion at both ends soaks up high-speed shock. It is a double-acting riveted construction built for a 1/8" port, a Ø12 mm piston rod, and an M10x1.25 male rod thread.
This Ø32 non-ISO-6432 bore delivers 402.2 N of push force at 0.5 MPa, yielding a safe working load of roughly 241 N or a 20.5 kg vertical lift with a 2:1 margin. The stainless barrel and rod resist mild corrosion and washdown environments. Note this SKU lacks a magnet (-S), so it cannot accept CMSG, DMSG, or EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ32X175-40 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X175-40 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X175-40
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X175-40 Is Used
Press Fit Tuning
Trim the 40 mm extend stop to perfectly seat a 20 kg bearing without bottoming out, relying on the 402.2 N push force and adjustable cushion to prevent impact damage.
Heavy Diverter Gate
Shift robust packages on a washdown line; the stainless build resists moisture while the needle cushion absorbs shock during 800 mm/s high-speed diverting strokes.
Carton Sealing Head
Set a precise 150 mm forward clamp position on the fly. The double-acting 1/8" port design delivers consistent pressure for secure flap folding.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X175-40 the Right Cylinder?
For lighter push needs, the Ø25 bore provides 245.3 N at 0.5 MPa, while stepping up to the Ø40 bore yields 628.3 N if this 402.2 N model is insufficient. Choose this Ø32 unit when you need substantial force combined with on-the-fly extend tuning and high-speed cushioning. The external screw and cushion needle are perfect for fast set-position moves, but remember this cylinder does not hold position on air loss—the piston drifts, so add an external rod lock or pilot check valve for suspended loads.
Mounting options include LB foot, FA flange, and TC trunnion, plus CA, U, R, or CM back covers. The SDB pivot-block is not available on this adjustable-stroke variant. Because this specific SKU has no magnet, position sensing is not possible without upgrading to the -S version.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X175-40 FAQ
This double-acting cylinder uses a 1/8" port and generates 402.2 N push and 345.6 N pull at 0.5 MPa. At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 40 mm on-site, and a needle valve adjusts the air cushion at both ends to decelerate high-speed impacts. The cylinder does not hold position on air loss; use an external rod lock for suspended loads. This non-magnet SKU cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X175-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.