Airtac MICJ Adjustable Mini Cylinder MICJ32X175-50S
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X175-50S is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 175mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X175-50S
Dial in a precise forward stop without swapping hardware using the AirTAC MICJ32X175-50S. An external screw shortens the extend end position by up to 50 mm on site, yielding a usable forward range of 125 to 175 mm, while a needle-set variable air cushion at both ends soaks up high-speed shock. As a double-acting round-body stainless mini cylinder, it features a 1/8" port, a Ø12 mm piston rod, and an M10x1.25 male rod thread.
The stainless steel barrel and rod resist mild corrosion and washdown environments. Delivering 402.2 N of push force at 0.5 MPa, it handles a safe working load of roughly 241 N, or about 20.5 kg of vertical lift with a 2:1 margin. This -S variant includes a built-in piston magnet for CMSG, DMSG, or EMSG sensors. Note that Ø32 is a non-ISO-6432 size, and the stop screw sets the end position rather than acting as a mid-stroke lock.
Airtac MICJ Adjustable Mini Cylinder MICJ32X175-50S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X175-50S |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X175-50S
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X175-50S Is Used
Adjustable Clamping Press
Clamp parts securely with 402.2 N of push force, using the 50 mm extend adjuster to set the exact forward stop for varying material thicknesses without changing tooling.
High-Speed Divertor
Rapidly divert packages on a line at speeds up to 800 mm/s, relying on the dual adjustable air cushions to absorb end-of-stroke shock and prevent mechanical damage.
Washdown Lift Gate
Lift roughly 20 kg of goods vertically in a humid washdown zone, benefiting from the stainless steel construction and tuning the extend position on site.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X175-50S the Right Cylinder?
For lighter duty, the Ø25 bore provides 245.3 N of push force at 0.5 MPa, whereas stepping up to the Ø40 bore yields 628.3 N. The Ø32 hits a sweet spot for medium loads requiring exact positioning. The 50 mm extend adjuster and dual cushions shine in fast set-position moves, letting you tune the forward stop and deceleration independently. Remember that the air cushion only decelerates near the stroke end; it is not a brake. If you need to hold a load on air loss, install an external rod lock or pilot check valve, as the piston will drift.
Mount this cylinder using LB foot, FA flange, or TC trunnion brackets, or choose CA, U, R, or CM back covers. The SDB pivot block is not available on this adjustable variant. Because this is an -S SKU, you can directly mount CMSG, DMSG, or EMSG sensors for position feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X175-50S FAQ
This double-acting cylinder features a 1/8" port and generates 402.2 N of push and 345.6 N of pull at 0.5 MPa. At 0.7 MPa, it provides 563 N of push and 483.8 N of pull. The theoretical maximum force is 82 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 50 mm, giving a usable forward range of 125 to 175 mm; retract remains full. Needle valves adjust the air cushions at both ends to decelerate the piston at high speed. The cushion only slows the piston near the end of travel and does not lock or hold position on air loss. This -S model includes a magnet for CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X175-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.