Airtac MICJ Adjustable Mini Cylinder MICJ32X200-100
The AirTAC Airtac MICJ Adjustable Mini Cylinder MICJ32X200-100 is a genuine double acting, adjustable stroke + cushion round-body mini air cylinder with a Ø32mm bore and 200mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ32X200-100
Dial in your forward stop on-site without swapping hardware: the MICJ32X200-100 uses an external screw to shorten the extend stroke by up to 100 mm, giving a usable forward range of 100-200 mm. This double-acting, round-body stainless-steel mini cylinder pairs that on-site adjustability with a needle-set variable air cushion at both ends to soak up high-speed shock.
Built with a stainless barrel and rod for mild washdown resistance, this Ø32 unit delivers 402.2 N of push force at 0.5 MPa. It uses a 1/8" port and an M10x1.25 male rod thread. Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ32X200-100 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ32X200-100 |
|---|---|
| Series | MICJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ32X200-100
| MICJ | round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ32X200-100 Is Used
Divert Gate Actuation
Tunes a 150 mm extend stroke to hit a divert gate precisely while the needle cushion absorbs the impact of high-speed package routing.
Carton Flap Folding
Provides 402.2 N of push force to fold heavy corrugated flaps, with the 100 mm adjuster allowing quick changes for varying box depths.
Pallet Stopper Arm
Halts pallets on a roller conveyor; the adjustable air cushion decelerates the load smoothly without requiring cylinder swaps.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ32X200-100 the Right Cylinder?
This 32 mm bore generates 402.2 N push at 0.5 MPa, yielding a safe working load of roughly 241 N or a 2:1 vertical lift capacity of about 20.5 kg. If your push needs are lighter, the Ø25 model provides 245.3 N; if you need more power, the Ø40 steps up to 628.3 N. The adjustable stop plus twin air cushions shine in fast set-position moves where you must tune the impact deceleration.
Remember that the stop screw sets the end position but is not a mid-stroke lock, and the air cushion only decelerates near the stroke end. The piston will drift on air loss, so add an external rod lock or pilot check valve for held loads. Mount via LB foot, FA flange, or TC trunnion (SDB is not offered), and note that sensing requires the -S variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ32X200-100 FAQ
This double-acting cylinder uses a 1/8" port and delivers 402.2 N push / 345.6 N pull at 0.5 MPa, and 563 N push / 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 100 mm (retract remains full), while a needle valve adjusts the air cushion at both ends to absorb high-speed shock. The cushion only decelerates near the end and is not a brake; the piston drifts on air loss, so use an external rod lock for holding. This non-S SKU cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ32X200-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.